Due to the large space requirements of the photovoltaic (PV) generator, PV systems are especially threatened by lightning discharges during thunderstorms. Causes for surges in PV systems are inductive or capacitive voltages derived from lightning discharges, as well as lightning surges and switching operations in the upstream power supply system. Lightning surges in the PV system can damage PV modules and inverters, which can have serious consequences for the operation of the system.
DEHN’s DEHNguard S PV SCI 600 and DEHNguard S PV SCI 150 are single-pole, modular surge protective devices for PV systems earthed on the DC side. These surge protective devices were tested to prEN 50539-11 and are designed for the international market. The DEHNguard S PV SCI 600 is UL-certified.
An additional DC fuse was added to the proven combined disconnection and short circuiting device with thermodynamic control to ensure safe replacement of protection modules without arc formation in case of an arrester overload. This synergy of technologies reduces the risk of damage to arresters due to installation and insulation faults in the PV circuit. It considerably reduces the risk of fire for an overloaded arrester and changes an overloaded arrester to a safe electrical state without disrupting the operation of the PV system.
Clearing the Static: Understanding the significance of ESD audits Actum Electronics
Circuit & System Protection
An ESD (Electrostatic Discharge) audit is the first step in establishing an ESD plan, and it is important to include all areas where ESD-sensitive components are being handled.
Read more...Microchip introduces ECC608 TrustMANAGER Altron Arrow
Circuit & System Protection
To increase security on IoT products and facilitate easier setup and management, Microchip Technology has added the ECC608 TrustMANAGER with Kudelski IoT keySTREAM, Software as a Service (SaaS) to its Trust Platform portfolio of devices, services and tools.
Read more...Varistors for automotive applications Future Electronics
Circuit & System Protection
TDK Corporation has announced the addition of two new varistors to its AVRH series for automotive applications where both are characterised by the high electrostatic discharge-withstanding voltage demanded to ensure the safe operation of safety-critical automotive functions.
Read more...Single-phase EMC filters RS South Africa
Circuit & System Protection
TDK Corporation has expanded its portfolio of single-phase EMC filters for AC and DC applications up to 250 V and rated currents from 6 to 30 A.
Read more...Clearing the Static: ESD protective packaging Actum Group
Circuit & System Protection
The primary objective of ESD protective packaging is to prevent ESD incidents within the packaging and facilitate the dissipation of charges from the outer surface.
Read more...New NeoMesh protocol stack version CST Electronics
Circuit & System Protection
NeoCortec has released an updated NeoMesh protocol stack version 1.6 firmware for its NC2400 and NC1000 module series, which now supports the new Sensirion SHT4xA temperature and humidity sensor series.
Read more...NewFeed feeder protection relay NewElec Pretoria
Circuit & System Protection
The NewFeed Feeder Protection Relay has been designed to protect the connection between solar farms and conventional power grids in both low voltage (LV) and medium voltage (MV) distribution settings.