Circuit & System Protection


USB protection device

9 November 2011 Circuit & System Protection

Texas Instruments has introduced what it claims is the industry’s first device to integrate four types of USB 2.0 chip protection – over-voltage, under-voltage, over-temperature and ESD – in a single package. The TPD4S014 provides a high level of protection against electrostatic discharge (ESD) and is the industry’s smallest USB protection device for all four USB channels, measuring only 2 x 2 mm.

Should the device junction temperature exceed 150°C, the switch turns off the power rail, thus protecting against over-temperature conditions. To protect the power rail from a moving voltage line, the load switch in the IC immediately opens, preventing under- or over-voltage if the power supply rail drops lower than 2,8 V or exceeds 6,15 V.

The TPD4S014 offers immunity of ±8 kV contact discharge and ±15 kV air-gap discharge per IEC61000-4-2 system-level ESD immunity testing. It is compatible with both Full Speed and High Speed USB, supporting data rates of up to 480 Mbps.

For more information contact EBV Electrolink, +27 (0)21 402 1940, [email protected], www.ebv.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Compact low-power 32-bit platform
EBV Electrolink DSP, Micros & Memory
Microchip’s PIC32CM PL10 microcontroller family expands the company’s Arm Cortex-M0+ portfolio, delivering a compact, low-power 32-bit platform designed for cost-sensitive embedded applications.

Read more...
Edge AI improves condition monitoring
EBV Electrolink AI & ML
STMicroelectronics has introduced the IIS3DWB10IS, an intelligent MEMS vibration sensor designed for high-performance industrial condition monitoring applications.

Read more...
EMC limits and levels
Altron Arrow Editor's Choice Circuit & System Protection
As soon as electronics and electrical systems started interfering with each other, the world had to come to some consensus. Considering physics is universal and does not care about what country electrical/electronic products are used in, it should be the same everywhere, right? It is nearly there, but not quite.

Read more...
Industrial time-of-flight proximity sensor
EBV Electrolink Opto-Electronics
STMicroelectronics’ VL53L4ED is a compact, high accuracy time-of-flight proximity sensor designed for industrial and embedded applications that require precise short range distance measurement.

Read more...
Ultra-low-power smart metering
EBV Electrolink Analogue, Mixed Signal, LSI
ScioSense’s UFC23 sensor combines improved resolution and offset stability with ultra-low standby current, enabling high-end battery-powered water, heat, gas and leak detection meter designs.

Read more...
Clearing the Static: The importance of cleaning in ESD control
Circuit & System Protection
The proper cleaning of ESD-safe areas and equipment such as workstations, floors, mats, trays, and tools using specialised antistatic cleaners is vital to prevent ESD damage.

Read more...
High-performance SSD storage
EBV Electrolink Telecoms, Datacoms, Wireless, IoT
Targeting the performance segment, the new KIOXIA XG10 Series leverages PCIe 5.0 technology to significantly elevate speed and responsiveness across data-intensive client applications.

Read more...
Safety relay for explosive areas
IOT Electronics Circuit & System Protection
Phoenix Contact has expanded its safety portfolio with the new PSR-MC35-EXI safety relay module, specifically engineered for use in potentially explosive environments.

Read more...
Next-gen robotic systems initiative
EBV Electrolink Design Automation
EBV Elektronik recently introduced MOVE – Driving Robotics Forward, a new initiative designed by EBV Elektronik‘s Embedded Solutions team to support the development of next-generation robotic systems.

Read more...
Compact high-current power inductor
EBV Electrolink Passive Components
Vishay’s IHLP series power inductors deliver high current capability in an ultra-low profile, magnetically shielded design.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved