The new PC 35 series of printed circuit board connectors from Phoenix Contact has a current carrying capability of up to 125 A and cable cross section up to 35 mm².
Since the plugging and unplugging forces of the connectors are quite low, they can be connected to devices – even those with high power rating – in a user-friendly manner. The conductor connection is implemented by screwing the tension sleeve tight. The two- to six-pin plug connectors are factory equipped with a screw flange that reliably connects it to the base strip. The flange can also be used as a panel feed-through on the base strip side and provides an additional hold within the device.
For pitch sizes of 15 mm, the connectors have received unrestricted 600 V UL approval in compliance with UL1059 (1000 V in accordance with IEC). Using the inverted versions of the IPC 35, shock-protected device outputs as well as free-hanging cable-to-cable connections and board-to-board connections are possible. The plug connectors and base strips are also available in a four-pin version with a professional-grade shield connection.
Read more...Low profile spring-loaded connectors Spectrum Concepts
Interconnection
Mill-Max has announced the introduction of low-profile, surface mount additions to its 2 mm pitch spring-loaded connector range.
Read more...Prefitted junction box solutions
Interconnection
Prepopulated junction boxes in popular terminal configurations, such as single- and three-phase, enhance convenience for both electrical wholesalers and contractors.
Read more...Bulgin unveils new range of sustainable connectors Avnet Abacus
Interconnection
The Standard Vitalis Buccaneer range of waterproof connectors is a bio-based alternative to Bulgin’s flagship series, the Standard Buccaneer, offering the same technical performance with improved sustainability.
Read more...Possible copper cable crisis looms as global demand soars
Interconnection
With the world requiring up to 3 billion metric tons of copper by 2050 to support green energy transitions and developing nations’ infrastructure, far exceeding the 23 million metric tons mined in 2024, pressure on supply chains is mounting.
Read more...High-reliability spring-loaded interconnects Spectrum Concepts
Interconnection
These springs from Mill-Max are drop-in replacements for the standard springs, requiring no changes to the form or fit of the existing spring-loaded pins.
Read more...Connectors for the Smart Factory Spectrum Concepts
Interconnection
[Sponsored] Designing networks for the smart factory can seem daunting, but the solutions are already available with Samtec providing a comprehensive range of interconnect technologies tailored to the demands of the modern factory.
Read more...Explosive zone connectors
Interconnection
The connector series design by Glenair is optimised for fast and easy crimp-contact wire termination, with ample wiring space in the cable housing and accessory hardware.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version