Avago Technologies released three high-speed optocouplers that deliver robust electrical signal isolation for intelligent power module (IPM) interface applications. The new ACPL-x484 optocouplers operate at 10 MBd and are available in three different compact packages to address IPM interfaces in AC and brushless DC motor drives, industrial inverters, air conditioners, renewable energy inverters, sewing machines and switching power supplies, as well as gate drive applications and general digital isolation.
With high common-mode rejection (CMR) of 30 kV/s, the devices prevent erroneous driving of an IPM and provide reliable operation in noisy environments. They offer fast switching with short propagation delays of 100 ns, resulting in reduced dead time, as well as improved efficiency and precision of motion. The optocouplers feature a wide supply voltage range from 4,5 V to 30 V, which ensures an IPM is driven to the optimum intended level and thus lowers system power budget.
The ACPL-M484 and ACPL-P484 offer input-output withstand voltage of 3750 Vrms while the ACPL-W484 offers 5000 Vrms, each for 1 minute for UL 1577 compliance. The devices meet IEC/EN/DIN EN 60747-5-2 approval with working voltage of 560 Vpeak for ACPL-M484, 891 Vpeak for ACPL-P484 and 1140 Vpeak for ACPL-W484.
PhotoMOS relays Future Electronics
Opto-Electronics
The AQY221R2SX and AQY221R2S PhotoMOS from Panasonic Industry ensures excellent characteristics and high-speed switching performance.
Read more...Mouser now shipping onsemi’s image sensors TRX Electronics
Opto-Electronics
The AR0145CS is a 1/4,3-inch CMOS digital image sensor with a 1280 (H) x 800 (V) active-pixel array that can capture both continuous video and single frames.
Read more...Adaptive optics’ power solution Altron Arrow
Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.
Read more...Ultra-high speed photo detection
Opto-Electronics
TDK Corporation has announced a photo-spintronic conversion element combining optical, electronic, and magnetic elements that can respond at an ultra-high speed of 20 picoseconds.
Read more...High-speed lasers RFiber Solutions
Opto-Electronics
Macom are a high-volume manufacturer of lasers, deploying more than 100 million devices with a reliability of less than 50 FIT and greater than 100 years of wear-out lifetime
Read more...High-performance optical interconnect
Opto-Electronics
STMicroelectronics has unveiled its next generation of proprietary technologies for higher-performing optical interconnect in datacentres and AI clusters.
Read more...First NVMe SSD Built with 8th-gen BiCS FLASH EBV Electrolink
Computer/Embedded Technology
KIOXIA recently announced the development and prototype demonstration of its new KIOXIA CM9 Series PCIe 5.0 NVMe SSDs, which incorporates CMOS directly Bonded to Array technology.
Read more...IMU with dual-sensing capability EBV Electrolink
Analogue, Mixed Signal, LSI
ST’s 6-axis inertial measurement unit integrates a dual accelerometer up to 320g and embedded AI for activity tracking and high-impact sensing.
Read more...Halo mid-board optical transceiver Spectrum Concepts
Opto-Electronics
The Samtec Halo mid-board transceiver has been designed for next-generation embedded applications that require 56 and 112 Gbps PAM4 performance in low profile and ruggedised form factors.
Read more...New generation of Ethernet media converters IOT Electronics
Opto-Electronics
Phoenix Contact is introducing three new families of media converters to the market, each designed for specific industrial environments and challenges.
printer friendly version