Computer/Embedded Technology


Touch panel displays

21 March 2012 Computer/Embedded Technology

With its TP 3000 series, Phoenix Contact has rolled out the second generation of its family of touch panels. The devices can be used with a wide range of fieldbuses; Profibus, MPI, CANopen or serial interfaces are optionally available. There is also a connection for additional Ethernet-based drivers. All devices are factory equipped with one Ethernet and two USB interfaces.

The powerful Xscale PXA320 platform with 806 MHz processor and 128 MB SDRAM can be used across the board with all display sizes, extending from 5,7” up to 12,1”. Touch panels up to and including the 7” screens have backlit LED displays. To save energy and extend lifetime, the LED backlighting can be dimmed or even shut off with the extended functional scope of the Visu+ visualisation software, from version 2.2x. In addition, it is possible to directly control the buzzer which is integrated in the panels. Events such as alarms are then acoustically signalled.

These panels are used in medium-sized machines where standard HMI functionality is required, and can be used in almost all sectors thanks to the high-quality aluminium housing, which is dust protected and waterproof at the front in accordance with IP65 standards.

For more information contact Andre Kemp, Phoenix Contact, +27 (0)11 801 8200, andrek@phoenixcontact.co.za, www.phoenixcontact.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

From idea to intelligent product
TRX Electronics Computer/Embedded Technology
Mouser Electronics has announced a new eBook in collaboration with Arduino – From Blink to Think: How Arduino UNO Q Helps Designers Go from Idea to Intelligent Product.

Read more...
Think Diamond Long-life COM-based SBCs
Electronic Products Design Computer/Embedded Technology
A COM-based SBC combines the flexibility of a standard computer-on-module (COM) with a baseboard offering additional I/O, expansion sockets, power supplies, and I/O connectors. The result is a highly flexible, highly expandable, feature-dense product that can be adapted to the widest range of applications, offering maximum product lifetime.

Read more...
Next-Gen Min-ITX motherboard
Vepac Electronics Computer/Embedded Technology
Adding to AAEON’s extensive industrial motherboard portfolio, the Next-Gen MIX-Q870A1 is the company’s most advanced Mini-ITX board to date.

Read more...
Rev 2.0 PolarFire FPGA ethernet sensor bridge
Altron Arrow Computer/Embedded Technology
Smaller, multi-camera platform enables scalable Ethernet architectures for NVIDIA Edge AI systems, while lowering power, cost and integration complexity.

Read more...
Rugged combo antennas cut multi-network installations down to one
iCorp Technologies Computer/Embedded Technology
Quectel Wireless Solutions has expanded its antenna portfolio with four rugged multi-network combo antennas.

Read more...
Intelligent video processing
Rugged Interconnect Technologies Computer/Embedded Technology
The CHARM150AGX is based on a NVIDIA AGX Orin embedded processor, which incorporates a multicore ARM processor and powerful AI/ML accelerator.

Read more...
Quectel’s single-board computers put industrial edge computing on one PCB
iCorp Technologies Computer/Embedded Technology
Quectel Pi series of single-board computers (SBCs), designed for a broad range of industrial applications, include three compact development platforms – the Quectel Pi M1, L1, and H1 boards.

Read more...
Nordic expands nRF Cloud with firmware vulnerability scanning
RF Design Computer/Embedded Technology
nRF Cloud identifies vulnerabilities in firmware and shows exactly which deployed devices are affected, empowering device manufacturers to address EU Cyber Resilience Act requirements.

Read more...
Arrival of the Epic-PTH9
Vepac Electronics Computer/Embedded Technology
AAEON introduces the EPIC-PTH9, a compact 4-inch industrial single-board computer powered by Intel Core Ultra Series 3 (formerly Panther Lake) processors.

Read more...
EPS-9600 Managed Layer 3 Ethernet Switch with next-generation Time- Sensitive Networking
Electronic Products Design Computer/Embedded Technology
Diamond Systems has introduced EPS-9610 (part of the EPS-9600 family), a rugged, ultra-compact embedded Ethernet switch which integrates military-grade ruggedness with next-generation Time-Sensitive Networking (TSN) capabilities.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved