PV connectors
21 March 2012
Interconnection
TE Connectivity’s SOLARLOK male and female cable couplers are designed for high voltage and high current-carrying capacity in addition to the well established IP67 sealing requirement in the photovoltaic (PV) industry.
Mating safety is provided by polarity keyed housings, fully shrouded high cycle life contacts and a squeeze-to-release connection system. In addition, fulfilment of worldwide standards for PV connection systems complements the robust product specification.
SOLARLOK connectors reduce labour time with plug-and-play interconnection of modules, and balance of system components such as combiner boxes, DC disconnects and inverters. Designed with a simple wire crimp, these latching connectors accommodate a wide range of wire sizes for a low applied cost.
The connectors are approved for field termination and accommodate PV cable from #14 to #10 AWG and outer diameter from 4,5 to 8,0 mm. They provide current carrying capacity up to 25 A (TÜV) and 20 A (UL) in operating temperatures of -40°C to 110°C.
For more information contact TE Connectivity, +27 (0)41 503 4500, [email protected], www.te.com
Further reading:
Blade terminals deliver greater power density
Spectrum Concepts
Interconnection
[Sponsored] Connectivity has become more important as designers pack more power into smaller spaces, all while managing thermal loads and ensuring efficiency.
Read more...
What’s the big deal with open pin fields?
Spectrum Concepts
Interconnection
The concept behind the open pin field array is that it provides many contacts that are not limited to a single role.
Read more...
Hirose Electric’s push-on bayonet lock connectors
Avnet Abacus
Interconnection
Hirose Electric’s HR22K Series is a compact, waterproof, and oil-resistant connector designed for demanding industrial environments.
Read more...
New connector for Push-X technology
Phoenix Contact
Interconnection
Phoenix Contact is extending the series of PCB connectors with innovative Push-X technology to include a new connector for conductor cross-sections up to 2,5 mm
2.
Read more...
Test cable designed for maximum ruggedness
Conical Technologies
Interconnection
The Anoison PT test cable is designed for maximum ruggedness using a high-quality raw cable, connector, and smart armouring module.
Read more...
Safe connection under load
Phoenix Contact
Interconnection
The ArcZero DC connectors from Phoenix Contact can be safely connected and disconnected under load, providing operators with reliable protection against hazardous electric arcs.
Read more...
Time-To-Market interconnect solutions
Interconnection
TTM Technologies are at the forefront of electrified powertrains, vehicle charging stations, and energy storage solutions, providing thermal management, high-current capabilities, and specialised solutions.
Read more...
Connectors for energy storage systems
Phoenix Contact
Interconnection
The new Phoenix Contact BPC series connectors are protected against polarity reversal making them ideally suited for use in energy storage systems.
Read more...
What’s the big deal with open pin fields?
Interconnection
The concept behind the open pin field array is that it provides many contacts that are not limited to a single role.
Read more...
mBend cable assemblies
Conical Technologies
Interconnection
The mBend cable assemblies from Anoison are designed to meet the growing demand for low-profile coaxial connections in applications where space is limited, and precise bending is necessary right next to the connectors.
Read more...
printer friendly version