|
|
Low-profile clamp filters
21 March 2012, Circuit & System Protection
TDK-EPC has developed the ZCAT-D series of TDK clamp filters. The new low-profile filters are especially suited for EMI suppression by eliminating noise in the power lines of flat-screen TVs, in speaker lines and similar applications.
The parts employ a vertically split cylindrical ferrite core, with the entire filter enclosed in a resin housing. The ferrite core, which was developed by applying TDK’s original materials technology, ensures excellent magnetic characteristics and effective RF noise suppression.
Because conventional products are too thick to fit into the rear case of flat-screen TVs, the new filter has been slimmed down. This was achieved by modifying the sintering method of the material for the ferrite core, allowing it to be made thinner without negatively affecting performance. The result is a 30% height reduction compared to conventional TDK products. The temperature range for usage is -25°C to +85°C. |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- GNSS boards for dead-reckoning
28 August 2019, Electrocomp, Telecoms, Datacoms, Wireless, IoT
The Locosys RTK-4671-SHDR/MHDR is a high-precision GNSS RTK (global navigation satellite system real-time kinematics) solution targeting the smart driving and lane-level navigation markets.
The newly ...
- Rugged PFC capacitors
28 August 2019, Electrocomp, Passive Components
TDK’s DeltaCap X Black Premium is a new series of Epcos MKD capacitors for power factor correction (PFC). With rated voltages of between 440 V a.c. and 850 V a.c., the capacitors with an internal delta ...
- Power inductors for LED headlights
28 August 2019, Electrocomp, Passive Components
TDK has expanded its lineup of metal core power inductors with the new SPM-VT series that is designed especially for the high thermal and current demands of automotive LED headlights. These wire-wound ...
- EMI AC line filters for avionics
31 July 2019, Conical Technologies, Circuit & System Protection
Part of the AeroQor range, SynQor’s latest EMI AC line filters bring the company’s technology and manufacturing expertise to the avionics COTS component marketplace. The components’ packaging ensures ...
- Ferrite magnetic design tool
26 June 2019, Electrocomp, Passive Components
The MDT software from TDK allows application-related parameters to be calculated for all available Epcos ferrite cores and/or materials. It provides access to digitalised material data including their ...
- N-channel enhancement mode FET
26 June 2019, Electrocomp, Power Electronics / Power Management
Diotec Semiconductor’s 2N7002 is a widely used small-signal MOSFET in SOT-23 package. With an RDS(on) of maximum 2 Ω, the component offers a lower on-state resistance than the common industry standard. ...
- Conductive rubber gaskets
31 July 2019, Conical Technologies, Circuit & System Protection
A range of conductive O-profile silicone rubber gaskets is available from Holland Shielding Systems, developed for high-performance shielding up to 18 GHz and used where environmental and EMI screening ...
- High-speed fuses to protect critical power electronics
31 July 2019, Altron Arrow, Circuit & System Protection
Littelfuse high-speed (semiconductor) fuses protect critical power electronics from over-currents that may cause damage to electronic equipment. The company’s high-speed fuses are reliable, very fast-acting ...
- Sealed enclosures for industrial electronics
26 June 2019, Electrocomp, Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing has added 36 new configurations to its 1554 and 1555 sealed enclosure families for Industry 4.0. Available in ABS or polycarbonate with styled, opaque, clear or smoked lids, the ...
- Vent panels for increased airflow and EMI protection
26 June 2019, Actum Electronics, Circuit & System Protection
Vent panels made by Laird Technologies offer effective ventilation within electronic equipment, while upholding signal integrity of the enclosure. Its MaxAir and ElectroVent solutions consist of layered, ...
- Consumer grade power inductors
26 June 2019, Electrocomp, Passive Components
Bourns is introducing the Model SRP7028C, SRP1038C and SRP1770C high-current shielded power inductor series, designed to meet today’s high current density requirements in various types of consumer electronics ...
- High-current shielded power inductors
26 June 2019, Electrocomp, Passive Components
The inductive components product line at Bourns has created the Model SRP5050FA and Model SRP7030CA high-current shielded power inductor series, designed to meet today’s high current density requirements ...
|
|
