After the launch of its RSD-100 (100 W) and RSD-150 (150 W) series, Mean Well has further expanded its second generation of enclosed type, single-output DC-DC converters with the introduction of the RSD-200 (200 W) series to fulfil the various requirements of vehicle applications.
Featuring a 2:1 (±40%) wide input range and 4000 V d.c. input/output isolation, the new devices are characterised by 5 G anti-vibration ability, wide working temperature range of -40°C to +70°C, protections for short circuit, overload, output over-voltage, over-temperature and input reverse polarity, as well as
built-in constant current limiting circuitry and 40 mm low-profile (1U compliant) design.
The RSD-200 series boasts up to 91% efficiency. All series are semi-encapsulated for PCB protection to provide the basic ability of anti-moisture, anti-dust, heat dissipation and anti-vibration. The design of these new converters conforms to ITE standards (IEC60950-1 and EN55022) and also comply with railway certificates (EN50155, IEC60571, IEC61373, EN50121-3-2), so that they are suitable to be used in all kinds of vehicles that are equipped with DC power sources.
Potential applications include railway, metro rapid transit system, subway, bus, leisure trailer, vessel etc. In addition, along with external batteries as the energy source, they are suitable for harsh industrial installations that are subject to dust and moisture, such as security systems, DC UPS systems and telecom equipment.
Rugged railway-grade DC-DC power modules iCorp Technologies
Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.
Read more...Four-quadrant regenerative grid simulator Conical Technologies
Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.
Read more...90 W PSU with 150% boost capability Brabek
Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.
Read more...Standalone USB PD controller Future Electronics
Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.
Read more...MIL-Spec DC-DC power converters Vepac Electronics
Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.
Read more...Compact power MOSFET for high current switching Future Electronics
Power Electronics / Power Management
onsemi’s NTMFSC2D6N08X is a high-performance 80 V N-channel power MOSFET engineered for demanding switching and power conversion applications.
Read more...DC link capacitors for demanding applications RS South Africa
Power Electronics / Power Management
TDK Corporation has announced the B3271xP series of DC link film capacitors, offering high thermal robustness for demanding automotive and industrial power electronics.
Read more...N-channel power MOSFETs TRX Electronics
Power Electronics / Power Management
The TSM2N7002 series from Taiwan Semiconductor are logic-level N-channel power MOSFETs designed with low drain-source on-state resistance, reducing conduction losses and improving efficiency in switching applications.
Read more...Smart power protection, simplified TRX Electronics
Power Electronics / Power Management
onsemi electronic fuses (eFuses) deliver integrated, intelligent protection by combining overcurrent, overvoltage, over-temperature, reverse polarity, and inrush current safeguards in a single compact IC.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version