Analogue, Mixed Signal, LSI


ADC driver

2 May 2012 Analogue, Mixed Signal, LSI

Texas Instruments has introduced a fully differential analog-to-digital converter (ADC) driver that provides a very high performance-to-power ratio.

The THS4531 fully differential amplifier uses only 250 μA of quiescent current while providing 36 MHz of bandwidth to support the needs of portable and high-density systems, such as flow meters and portable medical devices.

Bandwidth of 36 MHz, slew rate of 220 V/μs and fast settling time of 150 ns to 0,01% reduce data acquisition time for driving high sample rate converters. A power-down mode to 0,5 μA, quiescent current of 250 μA, and 2,5 V to 5 V supply operation allows battery-powered operation and flexible power supply selection.

The IC provides 16-bit accuracy to drive ADCs, such as the ADS8317 and ADS1278, as well other DC-coupled applications. Flexible negative-rail input common mode and rail-to-rail output enable simplified interface design with single-ended, ground-based signal sources and differential successive approximation register (SAR) and delta-sigma ADCs.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Analysis of switch-mode power supply: inductor violations
Altron Arrow Editor's Choice Power Electronics / Power Management
Common switch-mode power supply (SMPS) design errors are discussed, and their appropriate rectification is specified, with details on complications that arise with the power stage design of DC-DC switching regulators.

Read more...
Microsoft Windows IoT on ARM
Altron Arrow Computer/Embedded Technology
This expansion means that the Windows IoT ecosystem can now harness the power of ARM processors, known for their energy efficiency and versatility.

Read more...
Accelerating the commercialisation of the 5G IoT markets
Altron Arrow Editor's Choice Telecoms, Datacoms, Wireless, IoT
Fibocom unveils Non-Terrestrial Networks (NTN) module MA510-GL, enabling satellite and cellular connectivity to IoT applications.

Read more...
Microchip introduces ECC608 TrustMANAGER
Altron Arrow Circuit & System Protection
To increase security on IoT products and facilitate easier setup and management, Microchip Technology has added the ECC608 TrustMANAGER with Kudelski IoT keySTREAM, Software as a Service (SaaS) to its Trust Platform portfolio of devices, services and tools.

Read more...
xG26 sets new standard in multiprotocol wireless device performance
Altron Arrow AI & ML
Silicon Labs has announced its new xG26 family of Wireless SoCs and MCUs, which consists of the multiprotocol MG26 SoC, the Bluetooth LE BG26 SoC, and the PG26 MCU.

Read more...
SolidRun unveils new SoM
Altron Arrow AI & ML
SolidRun and Hailo has unveiled a game-changer for engineers and AI product developers with the launch of their market-ready SoM, which packs the cutting-edge capabilities of the Hailo-15H SoC.

Read more...
An evolutionary step in customisable logic
Altron Arrow DSP, Micros & Memory
Microchip Technology is offering a tailored hardware solution with the launch of its PIC16F13145 family of microcontrollers, which are outfitted with a new Configurable Logic Block module.

Read more...
MCU for battery-powered applications
Altron Arrow DSP, Micros & Memory
Included in ST’s family of devices is the STM32U031, an ultra-low-power MCU featuring an ARM Cortex-M0+ 32-bit core running at up to 56 MHz.

Read more...
LoRaWAN-certified sub-GHz module
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The STM32WL5M from ST Microelectronics is the company’s first LoRaWAN-certified module which incorporates two cores, one of them being a wireless stack to optimise the creation of sub-GHz applications.

Read more...
Dual-port USB-C power delivery solution
Altron Arrow Power Electronics / Power Management
Infineon’s CYPD7272-68LQXQ is the tray packing option of the company’s dual-port USB-C power delivery solution and features an integrated dual-port USB-C PD + DC-DC controller.

Read more...