Power Electronics / Power Management


150 W external power supplies

2 May 2012 Power Electronics / Power Management

With an average efficiency of 87% and an off load (standby) power consumption of less than 0,5 W, TDK-Lambda’s DT150-C series meets the latest ErP, CEC and EISA worldwide energy efficiency requirements. Well suited to powering instrumentation and industrial devices, the DT150-C is also suitable for a wide range of other general purpose applications.

Available in nominal output voltages, ranging from 12 V to 48 V, the external power supplies are packaged in an insulated, compact and lightweight enclosure measuring 85 x 170 x 44 mm, and are convection cooled. In addition, the DT150-C features a recessed IEC320-C14 AC inlet and a 1 m long output cable with a moulded Kykon 4-pin connector. The universal AC input of 90 to 264 V a.c. allows global operation.

Approved to international CSA/UL/EN/IEC60950-1 safety Class 1 agency standards, the DT150-C series also meets EN55022-B and FCC Class B conducted and radiated EMI. The DT150-C product range has over-voltage and short circuit protection and is delivered with a two-year warranty.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Rugged railway-grade DC-DC power modules
iCorp Technologies Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.

Read more...
Four-quadrant regenerative grid simulator
Conical Technologies Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.

Read more...
90 W PSU with 150% boost capability
Brabek Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.

Read more...
Standalone USB PD controller
Future Electronics Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.

Read more...
Panasonic TOUGHBOOK 33 2-in-1 detachable
Vepac Electronics Computer/Embedded Technology
The Panasonic TOUGHBOOK 33 is a fully rugged 12-inch 2-in-1 detachable notebook designed to deliver unmatched flexibility, durability, and performance for mobile professionals working in demanding environments.

Read more...
Power module enhances AI data centre power density
Altron Arrow Power Electronics / Power Management
Microchip’s MCPF1525 power module with PMBus delivers 25 A DC-DC power and is stackable up to 200 A.

Read more...
MIL-Spec DC-DC power converters
Vepac Electronics Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.

Read more...
Compact power MOSFET for high current switching
Future Electronics Power Electronics / Power Management
onsemi’s NTMFSC2D6N08X is a high-performance 80 V N-channel power MOSFET engineered for demanding switching and power conversion applications.

Read more...
DC link capacitors for demanding applications
RS South Africa Power Electronics / Power Management
TDK Corporation has announced the B3271xP series of DC link film capacitors, offering high thermal robustness for demanding automotive and industrial power electronics.

Read more...
N-channel power MOSFETs
TRX Electronics Power Electronics / Power Management
The TSM2N7002 series from Taiwan Semiconductor are logic-level N-channel power MOSFETs designed with low drain-source on-state resistance, reducing conduction losses and improving efficiency in switching applications.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved