Programmable Logic


Altera ships Cyclone V FPGAs

30 May 2012 Programmable Logic

Altera has started shipping its 28-nm Cyclone V FPGAs. Integrating a combination of high functionality with low system cost and low power, the family is well suited for applications in the industrial, wireless, wireline, military and automotive markets.

The Cyclone V family is developed on TSMC’s 28-nm Low Power (28LP) process, and delivers up to 40% lower total power and up to 30% lower static power than the previous generation. They offer low-power serial transceivers with 88 mW power consumption per channel at 5 Gbps and over 4000 MIPS processing performance for under 1,8 W.

Additionally, the family integrates an abundance of hard intellectual property blocks, such as hard memory controllers supporting 400 MHz DDR3 and PCI Express Gen2 hard IP blocks with multifunction support. To protect valuable IP investments, the family also includes comprehensive design protection with features such as a 256-bit Advanced Encryption Standard (AES) with volatile and non-volatile keys.

For more information contact EBV Electrolink, +27 (0)21 402 1940, [email protected],



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Compact low-power 32-bit platform
EBV Electrolink DSP, Micros & Memory
Microchip’s PIC32CM PL10 microcontroller family expands the company’s Arm Cortex-M0+ portfolio, delivering a compact, low-power 32-bit platform designed for cost-sensitive embedded applications.

Read more...
Edge AI improves condition monitoring
EBV Electrolink AI & ML
STMicroelectronics has introduced the IIS3DWB10IS, an intelligent MEMS vibration sensor designed for high-performance industrial condition monitoring applications.

Read more...
Industrial time-of-flight proximity sensor
EBV Electrolink Opto-Electronics
STMicroelectronics’ VL53L4ED is a compact, high accuracy time-of-flight proximity sensor designed for industrial and embedded applications that require precise short range distance measurement.

Read more...
Ultra-low-power smart metering
EBV Electrolink Analogue, Mixed Signal, LSI
ScioSense’s UFC23 sensor combines improved resolution and offset stability with ultra-low standby current, enabling high-end battery-powered water, heat, gas and leak detection meter designs.

Read more...
High-performance SSD storage
EBV Electrolink Telecoms, Datacoms, Wireless, IoT
Targeting the performance segment, the new KIOXIA XG10 Series leverages PCIe 5.0 technology to significantly elevate speed and responsiveness across data-intensive client applications.

Read more...
Next-gen robotic systems initiative
EBV Electrolink Design Automation
EBV Elektronik recently introduced MOVE – Driving Robotics Forward, a new initiative designed by EBV Elektronik‘s Embedded Solutions team to support the development of next-generation robotic systems.

Read more...
Compact high-current power inductor
EBV Electrolink Passive Components
Vishay’s IHLP series power inductors deliver high current capability in an ultra-low profile, magnetically shielded design.

Read more...
Highly integrated 24-channel mixed signal IC
EBV Electrolink DSP, Micros & Memory
Microchip Technology has announced the LX4580, a 24-channel mixed-signal IC designed to replace multiple discrete components with a single device that supports synchronised data acquisition, fault monitoring, and motor control.

Read more...
Touch-enabled 32-bit MCU
EBV Electrolink DSP, Micros & Memory
Microchip’s PIC32CM PL10 microcontroller family expands the company’s Arm Cortex-M0+ portfolio, delivering a compact, low-power 32-bit platform designed for cost-sensitive embedded applications.

Read more...
Smarter compact automation with LOGO! 9
RS South Africa Programmable Logic
Siemens recently announced LOGO! 9, the latest generation of its compact logic controller designed for small automation projects in both industrial and building applications.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved