Renesas Electronics announced the availability of two IC-output optocouplers with long creepage distance for applications such as industrial equipment employing the maximum commercial power supply voltage of 690 V or solar power generation systems employing high voltages of up to 1000 V.
The PS9924 is a high-speed optocoupler supporting internal system communication speeds of 10 Mbps and the PS9905 is an optically coupled 2,5 A IGBT driver featuring high-speed switching performance and reduced output voltage drop due to MOSFET-MOSFET output form.
The devices are housed in a novel 8-pin long-SDIP (LSDIP) package, which combines small pin pitch (1,27 mm) with increased distance between the input and the output. Thus, despite small space requirements, outstanding isolation properties are achieved.
In addition to a minimum external creepage distance of 14,5 mm, the optocouplers are specified for an isolation voltage of 7500 Vrms.
The new devices comply with international safety standards such as UL, CSA and VDE (optional) making them well suited for deployment in harsh application environments like motor control, measuring instruments and factory automation.
The PS9924 is designed for 10 Mbps bandwidth operations over an extended temperature range from -40°C to +110°C. The detector IC of the active-low type PS9924 features an open collector output and low operation voltages from 2,7 V to 5,5 V allowing a flexible circuit design. Thanks to a specified maximum propagation delay time of 75 ns and a typical value of 40 ns at 25°C, a communication bandwidth of 10 Mbps can be achieved.
For safe operations in noisy industrial environments, the new Renesas optocouplers incorporate an internal shield providing common-mode transientrejection (CMR) of minimum 15 kV/μs and typical values of 20 kV/μs.
Enhanced breaker status and communication module Schneider Electric South Africa
Opto-Electronics
Schneider Electric has announced the launch of its new Breaker Status and Communication Module (BSCM) Modbus SL/ULP, which delivers enhanced performance, improved connectivity, and simplified integration for power distribution systems.
Read more...Heat-resistant LEDs
Opto-Electronics
Würth Elektronik’s new RGB LEDs are characterised by excellent heat resistance with an insensitivity to temperatures from -40 to 100°C making them ideal solutions for reliable, colour-variable lighting in applications at high operating temperatures.
Read more...PhotoMOS relays Future Electronics
Opto-Electronics
The AQY221R2SX and AQY221R2S PhotoMOS from Panasonic Industry ensures excellent characteristics and high-speed switching performance.
Read more...Mouser now shipping onsemi’s image sensors TRX Electronics
Opto-Electronics
The AR0145CS is a 1/4,3-inch CMOS digital image sensor with a 1280 (H) x 800 (V) active-pixel array that can capture both continuous video and single frames.
Read more...Adaptive optics’ power solution Altron Arrow
Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.
Read more...Ultra-high speed photo detection
Opto-Electronics
TDK Corporation has announced a photo-spintronic conversion element combining optical, electronic, and magnetic elements that can respond at an ultra-high speed of 20 picoseconds.
Read more...High-speed lasers RFiber Solutions
Opto-Electronics
Macom are a high-volume manufacturer of lasers, deploying more than 100 million devices with a reliability of less than 50 FIT and greater than 100 years of wear-out lifetime
Read more...High-performance optical interconnect
Opto-Electronics
STMicroelectronics has unveiled its next generation of proprietary technologies for higher-performing optical interconnect in datacentres and AI clusters.
Read more...Halo mid-board optical transceiver Spectrum Concepts
Opto-Electronics
The Samtec Halo mid-board transceiver has been designed for next-generation embedded applications that require 56 and 112 Gbps PAM4 performance in low profile and ruggedised form factors.
Read more...New generation of Ethernet media converters IOT Electronics
Opto-Electronics
Phoenix Contact is introducing three new families of media converters to the market, each designed for specific industrial environments and challenges.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version