The AMFW-6S-12601520-90-WR62 is MITEQ’s newesthigh-performance waveguide LNA for Ku-band. It is weatherproof and features low noise and high dynamic range, operating from 12,65 GHz to 15,2 GHz.
The device includes a pressure-sealed WR62 waveguide input and SMA (F) output. It includes reverse voltage, overcurrent and overtemperature protection in addition to full internal regulation.
The LNA’s aluminium alloy housing is sealed against severe environmental conditions. Its total weight is approximately 270 grams, and dimensions are 53 x 33 x 33 mm.
The AMFW-6S-12601520-90-WR62 has a typical noise temperature of 80K, with a maximum of 90K, and it is capable of a minimum 10 dBm of P1dB across the full band, with an available option of 20 dBm. Noise temperature will typically change with base temperature of the LNA at a rate of 0,28 K/°C.
Output IP3 is 20 dBm minimum, while input VSWR is a maximum of 1,5:1 and output port VSWR is a maximum of 2:1. Small-signal gain is 50 dB typical and flatness is 2,0 dB peak-to-peak with a maximum gain ripple of 0,4 dB/40 MHz within the whole band.
The device’s gain variation with temperature is less than 0,08 dB/°C; over time the gain is stable to less than 0,4 dB/month. Total group delay is constant to less than 1 ns over the full band. Current draw is nominally 200 mA from a single +12 V to 24 V supply; other voltage ranges and alarm options are available, as is an alarm feature. Operating temperature is -40°C to +60°C case.
Input power bus conditioners Accutronics
Power Electronics / Power Management
The FLHG-60 and the FLHGI-60 are designed to be used as the front-end to the company’s MGDD N input series, to develop full power solutions.
Read more...Hi-Rel DC-DC converter Accutronics
Power Electronics / Power Management
The MGDD-06 series from GAÏA Converter is an ultra-wide input 6 W family of power converter modules, with a permanent input voltage range of 9 to 160 V DC.
Read more...High-speed PIN diode Altron Arrow
Analogue, Mixed Signal, LSI
Vishay’s new high-speed Silicon PIN diode is able to detect both visible and near infra-red radiation over a wide spectrum range from 350 to 1100 nm.
Read more...Analogue front end for sensor measurements Electrocomp
Analogue, Mixed Signal, LSI
The NJU9103 AFE from Nisshinbo is a tiny analogue front end, with a 16-bit resolution ADC and up to 512 x signal amplification from the programmable gain amplifier.
Read more...Single-channel software configurable I/O Altron Arrow
Analogue, Mixed Signal, LSI
These use cases of the AD74115H include analogue output and input, digital output and input, resistance temperature detector (RTD), and thermocouple measurement capability.
Read more...Current-sense amplifier with PWM rejection Altron Arrow
Analogue, Mixed Signal, LSI
Analog Devices’ AD8410A is a high voltage, high bandwidth current-sense amplifier that features an initial gain of 20 V/V and a 2,2 MHz bandwidth.
Read more...60 W DC-DC FEM for military applications Accutronics
Power Electronics / Power Management
GAIA Converter has launched a fully integrated 60 W DC-DC front-end module that greatly simplifies the design of military power converter architectures.
Read more...Combining a LPF and ADC driver for a 20 Vp-p signal Altron Arrow
Analogue, Mixed Signal, LSI
A mixed-signal ADC driver circuit’s optimum performance depends on multiple variables: the driver’s settling time, the RC filter’s time constant, driving impedance, and the ADC sampling capacitor’s kickback current, all interact during acquisition time and contribute towards sampling errors.
Read more...Pressure sensor with NextNav certification EBV Electrolink
Analogue, Mixed Signal, LSI
STMicroelectronics’ LPS22DF pressure sensor has received a NextNav certification, which guarantees performance and reliability for geolocation and other types of applications.
Read more...250 W DC/DC converter module Accutronics
Power Electronics / Power Management
This high-reliability quarter brick converter, ideal for mission-critical applications, offers a permanent input voltage range of 16 to 75 V DC (up to 80 V DC for 1 s) and a constant output voltage of 28 V DC.
printer friendly version