Wireless sensor nodes

Telecoms, Datacoms, Wireless, IoT

Microwave semiconductor & tube suppliers

Radio system suppliers

RF module & subsystem suppliers

Telephony IC suppliers

Wireless system IC/module suppliers

printer friendly version

19 September 2012 Telecoms, Datacoms, Wireless, IoT

A new breed of app could soon be finding its way onto mobiles or set-top boxes, taking advantage of a new open platform for smart buildings put forward by STMicroelectronics.

The company’s GreenNet wireless sensor networking technology addresses the challenge to efficiently use energy for heating and lighting and for increasing consumer safety via monitoring of their environment.

The platform comprises self-powered nodes that can be positioned around the home for tasks such as temperature, CO (carbon monoxide) or movement sensing, relaying data wirelessly to a GreenNet dongle installed in a PC or set-top box. The data could then be communicated to a mobile device such as a smartphone or tablet via a wireless router to enable monitoring and control.

The fundamental building block is the GreenNet node, which utilises core ST technologies in energy management, silicon-based sensors and embedded wireless to create an easy-to-use network node free of wires or any need to change batteries.

The node combines a rechargeable battery, a solar cell and a 2,4 GHz radio coupled with the STM32L Cortex-M3 ultra-low-power MCU that consumes minimal power and can operate autonomously powered only by ambient light energy.

To facilitate adoption by do-it-yourselfers as well as professionals, this approach reduces smart-home installation to a simple process of placing nodes in suitable locations, and aims to encourage greater consumer use as well as adoption in offices and industrial buildings.

By using open standards, such as IPv6, the platform offers high performance and flexibility and – more importantly – allows independent developers to create easy-to-use downloadable apps for tasks such as home monitoring, security or fire safety.

ST is now demonstrating the system using a sample node that features an on-chip temperature sensor, a USB dongle and a service platform including sample app store. Operating from only 150 lux of ambient light available for six hours per day, it can relay one temperature measurement every five minutes.

It can still operate autonomously for up to six weeks in the dark as part of an effective environmental monitoring system.

Share this article:

SIMCom’s A7673x series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.

Read more...

Accelerating the commercialisation of the 5G IoT markets
Altron Arrow Editor's Choice Telecoms, Datacoms, Wireless, IoT
Fibocom unveils Non-Terrestrial Networks (NTN) module MA510-GL, enabling satellite and cellular connectivity to IoT applications.

Read more...

Long-range connectivity module
Avnet Silica Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.

Read more...

4G LTE-M/NB-IoT connectivity reference design
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.

Read more...

Antennas to meet all connectivity requirements
Electrocomp Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.

Read more...

Introducing SIMCom’s new A7673X series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.

Read more...

18 W monolithic microwave amplifier
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.

Read more...

Categories

Telecoms, Datacoms, Wireless, IoT

Wireless sensor nodes

Further reading:

Publications by Technews