The KMA36 from Measurement Specialties is a universal magnetic encoder for precise rotational or linear measurement. It features system-on-chip technology that combines a magneto-resistive element along with analog-to-digital converter and signal processing.
By employing anisotropic magneto-resistive (AMR) technology, the device is able to contactlessly determine the magnetic angle of an external magnet over 360 , as well as the incremental position on a magnetic pole strip with 5 mm pole length. Its sleep and low-power modes, as well as automatic wakeup over I²C, make the KMA36 ideal for many battery-powered applications.
Position data can be transmitted using a PWM or two-wire (SDA, SCL) communication bus. Using the programmable parameters, the user has access to a wide range of configuration options to ensure design freedom and functionality.
Used as both a linear position sensor or a rotary position sensor, the sensor is insensitive to magnetic drift due to mechanical tolerances, changes in temperature or thermal stress. Its maintenance-free operation and high bandwidth make it a good choice for dynamic applications in harsh environments.
Input power bus conditioners Accutronics
Power Electronics / Power Management
The FLHG-60 and the FLHGI-60 are designed to be used as the front-end to the company’s MGDD N input series, to develop full power solutions.
Read more...Hi-Rel DC-DC converter Accutronics
Power Electronics / Power Management
The MGDD-06 series from GAÏA Converter is an ultra-wide input 6 W family of power converter modules, with a permanent input voltage range of 9 to 160 V DC.
Read more...High-speed PIN diode Altron Arrow
Analogue, Mixed Signal, LSI
Vishay’s new high-speed Silicon PIN diode is able to detect both visible and near infra-red radiation over a wide spectrum range from 350 to 1100 nm.
Read more...Analogue front end for sensor measurements Electrocomp
Analogue, Mixed Signal, LSI
The NJU9103 AFE from Nisshinbo is a tiny analogue front end, with a 16-bit resolution ADC and up to 512 x signal amplification from the programmable gain amplifier.
Read more...Single-channel software configurable I/O Altron Arrow
Analogue, Mixed Signal, LSI
These use cases of the AD74115H include analogue output and input, digital output and input, resistance temperature detector (RTD), and thermocouple measurement capability.
Read more...Current-sense amplifier with PWM rejection Altron Arrow
Analogue, Mixed Signal, LSI
Analog Devices’ AD8410A is a high voltage, high bandwidth current-sense amplifier that features an initial gain of 20 V/V and a 2,2 MHz bandwidth.
Read more...60 W DC-DC FEM for military applications Accutronics
Power Electronics / Power Management
GAIA Converter has launched a fully integrated 60 W DC-DC front-end module that greatly simplifies the design of military power converter architectures.
Read more...Combining a LPF and ADC driver for a 20 Vp-p signal Altron Arrow
Analogue, Mixed Signal, LSI
A mixed-signal ADC driver circuit’s optimum performance depends on multiple variables: the driver’s settling time, the RC filter’s time constant, driving impedance, and the ADC sampling capacitor’s kickback current, all interact during acquisition time and contribute towards sampling errors.
Read more...Pressure sensor with NextNav certification EBV Electrolink
Analogue, Mixed Signal, LSI
STMicroelectronics’ LPS22DF pressure sensor has received a NextNav certification, which guarantees performance and reliability for geolocation and other types of applications.
Read more...250 W DC/DC converter module Accutronics
Power Electronics / Power Management
This high-reliability quarter brick converter, ideal for mission-critical applications, offers a permanent input voltage range of 16 to 75 V DC (up to 80 V DC for 1 s) and a constant output voltage of 28 V DC.
printer friendly version