Test & Measurement


4-in-1 PC-based test instrument

3 April 2013 Test & Measurement

K Measure has added a multifunction test instrument from Hantek to its range of products. The DSO-3062AL packs the following instruments into one piece of equipment, all with a unified, easy-to-use software interface:

* Dual-channel oscilloscope (200/100 MSps, 60 MHz).

* 16-channel logic analyser (100 MSps, 10 MHz).

* Arbitrary waveform generator (0–25 MHz, ±3,5 V).

* Spectrum analyser (4 different FFT functions).

The fact that it can analyse signals in both digital and analog electronics, as well as function as a wave generator, makes the instrument an excellent companion for the modern electronics engineer who must work in both the digital and analog domains.

It has many advanced features like mixed-signal triggering, Y-X plotting, 23 signal measurements (including frequency, RMS, pulse width and duty cycle), pass/fail testing and four different FFT methods. It connects via USB 2.0 and there are optional Ethernet and Wi-Fi connection modules available.

The DSO-3062AL comes with all probes, cables and PC software, and as with all K Measure’s other products, stock is available and orders are shipped within 24 hours.

For more information contact K Measure, +27 (0)87 230 0134, [email protected], www.kmeasure.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Analyser and voltmeter capability added to portable instruments
Tamashi Technology Investments Test & Measurement
Anritsu Company had added Vector Network Analyzer and Vector Voltmeter measurements to their industry standard Site Master instruments.

Read more...
Marktech’s latest LEDs and photodiodes
NuVision Electronics Test & Measurement
Designed for precision sensing and emission tasks, Marktech’s optoelectronic lineup serves medical, industrial, aerospace, and environmental markets.

Read more...
MEMS air quality sensor
Future Electronics Test & Measurement
Bosch Sensortec’s BME690 is the latest-generation gas sensor that combines advanced monitoring capabilities with innovative artificial intelligence functionality.

Read more...
Telemetry retrofit for sustainable resource management
CST Electronics Test & Measurement
AquaMeter is a cost-effective secure telemetry retrofit that can easily be added to hundreds of millions of legacy mechanical water meters.

Read more...
True-RMS clamp meter measures 2500 A
Comtest Test & Measurement
The Fluke 376 FC True-RMS Clamp Meter with iFlex is the most advanced troubleshooting tool for industrial and commercial electricians.

Read more...
Latest wireless barcode scanner
Brady Corporation Test & Measurement
Brady has launched its new barcode scanner, the CR2100, which is a wireless handheld scanner utilising Bluetooth 5 LE for communication with a host device.

Read more...
hybridNETBOX instrumentation platform
Vepac Electronics Test & Measurement
The hybridNETBOX from Spectrum Instrumentation is an innovative instrumentation platform that combines a multi-channel arbitrary waveform generator (AWG) and a digitiser in a single portable unit.

Read more...
14-bit AWG at 20 GS/s
Vepac Electronics Test & Measurement
The Arb Rider AWG-7000 is the world’s fastest 14-bit Arbitrary Waveform Generator, featuring a 20 GS/s real time update rate and 14-bit vertical resolution.

Read more...
Additions to APD5000 series oscilloscopes
Osiris Technical Systems Test & Measurement
Each unit is equipped with an integrated CAT II digital multimeter, three programmable power supplies, a dedicated trigger line, and an arbitrary waveform generator.

Read more...
Handheld RTSA up to 9,5 GHz
Vepac Electronics Test & Measurement
The PXE-90 implements an FFT engine on the built-in FPGA and support frame compression with trace detection while ensuring no missing samples between FFT frames.

Read more...