Opto-Electronics


60 V LED drivers

3 April 2013 Opto-Electronics

New from Infineon Technologies are two 60 V DC-DC LED drivers that boast high power conversion efficiency, high current accuracy that helps assure constant light output, and adjustable over-temperature protection that protects light elements from damage through overheating.

The new ILD6070/ILD6150 drivers give lighting manufacturers the flexibility to produce multiple products using the same drivers, based on a wide input voltage range (4,5 to 60 V), adjustable output current of up to either 0,7 or 1,5 A, and support of digital or analog dimming inputs, with a maximum dimming contrast ratio as high as 3000:1.

With the addition of 60 V devices to its portfolio, Infineon enables manufacturers to support as many as 18 LEDs in a light string, compared to a maximum of 12 LEDs in typically available 40 V devices. This helps manufacturers to lower costs or achieve higher lumens in a lighting system.

The new drivers extend Infineon’s portfolio of switched-mode, buck topology LED drivers for low-voltage driven lighting applications, including indoor and outdoor systems in residential, commercial and industrial environments.

They operate at up to 1 MHz switching frequency, which reduces manufactured cost and PCB space by reducing the size of external components needed in a design. Reduced size is also supported by the high efficiency and corresponding improved thermal performance of the drivers.

Designers working with Infineon LED driver ICs can access the Infineon Light Desk design tool at www.infineon.com/lightdesk. The tool allows quick design and simulation of LED driver circuitries for all types of LED applications, with optional redesign and download of the design summary with specification, schematics and bill of materials.

For more information contact EBV Electrolink, +27 (0)21 402 1940, [email protected], www.ebv.com, Electrocomp, +27 (0)11 458 9000, [email protected], www.electrocomp.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

PhotoMOS relays
Future Electronics Opto-Electronics
The AQY221R2SX and AQY221R2S PhotoMOS from Panasonic Industry ensures excellent characteristics and high-speed switching performance.

Read more...
Mouser now shipping onsemi’s image sensors
TRX Electronics Opto-Electronics
The AR0145CS is a 1/4,3-inch CMOS digital image sensor with a 1280 (H) x 800 (V) active-pixel array that can capture both continuous video and single frames.

Read more...
Adaptive optics’ power solution
Altron Arrow Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.

Read more...
Ultra-high speed photo detection
Opto-Electronics
TDK Corporation has announced a photo-spintronic conversion element combining optical, electronic, and magnetic elements that can respond at an ultra-high speed of 20 picoseconds.

Read more...
High-speed lasers
RFiber Solutions Opto-Electronics
Macom are a high-volume manufacturer of lasers, deploying more than 100 million devices with a reliability of less than 50 FIT and greater than 100 years of wear-out lifetime

Read more...
High-performance optical interconnect
Opto-Electronics
STMicroelectronics has unveiled its next generation of proprietary technologies for higher-performing optical interconnect in datacentres and AI clusters.

Read more...
First NVMe SSD Built with 8th-gen BiCS FLASH
EBV Electrolink Computer/Embedded Technology
KIOXIA recently announced the development and prototype demonstration of its new KIOXIA CM9 Series PCIe 5.0 NVMe SSDs, which incorporates CMOS directly Bonded to Array technology.

Read more...
IMU with dual-sensing capability
EBV Electrolink Analogue, Mixed Signal, LSI
ST’s 6-axis inertial measurement unit integrates a dual accelerometer up to 320g and embedded AI for activity tracking and high-impact sensing.

Read more...
Track with precision
Electrocomp Telecoms, Datacoms, Wireless, IoT
KYOCERA AVX provides innovative antennas for cellular, LTE-M, NB-IoT, LoRa, GNSS, BLE, UWB, Wi-Fi, and future Satellite IoT.

Read more...
Halo mid-board optical transceiver
Spectrum Concepts Opto-Electronics
The Samtec Halo mid-board transceiver has been designed for next-generation embedded applications that require 56 and 112 Gbps PAM4 performance in low profile and ruggedised form factors.

Read more...