Vishay has enhanced its ACAS 0606 AT and ACAS 0612 AT precision thin film chip resistor arrays with tighter absolute tolerance, relative tolerance and relative TCR for the new S, T and U accuracy grades. Typical applications will include industrial electronics, such as energy management, measurement control, sensors, scales and precision amplifiers; and automotive electronics, including engine control units, gearbox controls, safety, power supply electronics, body electronics, braking systems, climate control, steering technology and lighting.
Offering two and four integrated resistors on one substrate, respectively, the ACAS 0606 AT and ACAS 0612 AT lower costs when compared to using multiple high-precision discrete resistors, while at the same time their stable divider ratio improves the stability of the application.
For increased accuracy, the arrays combine their high-temperature operation to +155°C with tight absolute tolerance of ±0,1%, relative tolerance of ±0,05 %, absolute TCR down to ±10 ppm/K and relative TCR down to ±5 ppm/K. They offer resistance from 47 Ω to 150 kΩ, with equal or different resistor values, and maximum resistance ratio of 1:20.
The ACAS 0606 AT and ACAS 0612 AT are robust against harsh environmental conditions and provide superior moisture resistivity of lR/Rl < 0,5% at +85°C and 85% relative humidity for 1000 hours. They offer 1000 V ESD capability, a 75 V operating voltage and maximum rated dissipation to 0,125 W per element.
For automotive applications, the resistors are qualified according to AEC-Q200.
The arrays are ideally suited for precision analog circuits, voltage dividers and feedback circuit applications that require highly stable, fixed resistor ratios.
NXP has expanded its MCX A Series Altron Arrow
AI & ML
NXP has significantly expanded its MCX A Series of Arm Cortex-M33 microcontrollers, doubling the portfolio with six new families aimed at industrial and IoT edge applications.
Read more...Exploring Bluetooth Channel Sounding Altron Arrow
Telecoms, Datacoms, Wireless, IoT
NXP has enabled BCS on the MCX W72 multi-protocol wireless MCU, which supports Bluetooth Low Energy 6.0, Thread, Zigbee, and Matter.
Read more...Dual-band Wi-Fi 6 companion module Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The SimpleLink Wi-Fi CC33xx family of devices from Texas Instruments are dual-band Wi-Fi 6 companion modules enabling engineers to connect more applications with confidence.
Read more...High-performance linear regulator Altron Arrow
Power Electronics / Power Management
The TI TPS7A57-Q1 is an automotive-grade, high-performance low-dropout linear regulator, engineered for precision power delivery in noise-sensitive systems.
Read more...Quad RF ADC/DAC for wideband transceiver design Altron Arrow
DSP, Micros & Memory
The AD9084 from Analog Devices integrates a quad 16-bit RF digital-to-analogue converter with a maximum sampling rate of 28 GSPS and a quad 12-bit RF analogue-to-digital converter.
Read more...Collaboration to explore 10BASE-T1S SPE Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The collaboration between Microchip and Hyundai aims to evaluate and promote the adoption of advanced in-vehicle network technologies leveraging each company’s strengths.
Read more...High-performance processing for cost-aware industrial IoT Altron Arrow
DSP, Micros & Memory
STMicroelectronics has expanded its industrial processing portfolio with the new STM32MP2 series, a family of application microprocessors designed to deliver higher performance, advanced security and long-term reliability for cost-sensitive industrial IoT systems.
Read more...Compact, durable and wideband wireless performance Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The Taoglas Metal Stamped MPA Series of antennas is engineered to meet the growing demands of modern wireless devices that require high performance in increasingly compact form factors.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version