Opto-Electronics


Dimmable LED controller for MR16 lamps

10 July 2013 Opto-Electronics

NXP Semiconductors unveiled a dimmable single-stage controller IC for retrofit MR16 LED lamps using 12 V a.c. mains.

The SSL3401 offers compatibility with a wide range of dimmers and transformers – working with over 80% of the most common combinations – in a compact form factor that fits in all commonly available MR16 GU5.3 and AR111 housings and sockets.

Supporting an ambient temperature range up to 105°C, the device also provides temperature rollback protection. Based on NXP GreenChip technology, it generates a stable and accurate current while dimming down to below 5% of maximum light output in most common practical situations.

While maximum lamp power depends on the thermal design of the lamp, a typical 7 W MR16 LED lamp using the SSL3401 achieves THD below 15%, power factor above 0,9, efficiency up to 78% and LED ripple current below ±10%.

For more information contact EBV Electrolink, +27 (0)21 402 1940, [email protected], www.ebv.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

General-purpose MCU with RISC-V architecture
EBV Electrolink DSP, Micros & Memory
Renesas has released a general-purpose MCU to enhance its existing RISC-V portfolio, and this is its first MCU using a RISC-V core developed internally at the company.

Read more...
AI-native IoT platform launched
EBV Electrolink AI & ML
These highly-integrated Linux and Android SoCs from Synaptics are optimised for consumer, enterprise, and industrial applications and deliver an ‘out-of-the-box’ edge AI experience.

Read more...
Serial SRAM up to 4 MB
EBV Electrolink DSP, Micros & Memory
The chips are designed to provide a lower-cost alternative to traditional parallel SRAM products, and include optional battery backup switchover circuitry in the SRAM memory to retain data on power loss.

Read more...
Microchip expands its mSiC solutions
EBV Electrolink Power Electronics / Power Management
The highly integrated 3,3 kV XIFM plug-and-play digital gate driver is designed to work out-of-the-box with high-voltage SiC-based power modules to simplify and speed system integration.

Read more...
Powering up the intelligent edge
EBV Electrolink DSP, Micros & Memory
STMicroelectronics is releasing new devices from the second generation of its industrial microprocessors (MPUs), the STM32MP2 series, to drive future progress in smart factories, smart healthcare, smart buildings, and smart infrastructure.

Read more...
Mouser broadens its LED lineup
Opto-Electronics
Mouser has broadened its LED lineup with diverse solutions designed to support lighting, medical, and smart home applications.

Read more...
Flash for AI
EBV Electrolink AI & ML
SCM offers a midway latency point between DRAM and SSDs, and when coupled with the introduction of CXL, low-latency flash, such as XL-FLASH, is well-positioned to deliver improvements in price, system performance, and power consumption to everything from servers to edge devices deploying the power of AI.

Read more...
UFS Ver. 4.0 embedded Flash memory devices
EBV Electrolink Computer/Embedded Technology
KIOXIA Europe has announced sampling of the industry’s first Universal Flash Storage (UFS) version 4.0 embedded Flash memory devices designed for automotive applications.

Read more...
InnoSwitch5 Offline Flyback Switcher IC
EBV Electrolink Power Electronics / Power Management
ero-voltage switching (ZVS) flyback topology and advanced SR FET control enable 95% efficiency, together with reduced power supply size and component count.

Read more...
IGBT power module
EBV Electrolink Power Electronics / Power Management
The company has now released its new half-bridge IGBT power modules offered in its redesigned INT-A-PAK package.

Read more...