Opto-Electronics


25 W LED driver

4 September 2013 Opto-Electronics

With the new RACD25 series, Recom is extending its range of high-quality LED drivers. Thanks to their long, sleek shape, the 25 W modules are ideally suitable as power sources for the conversion from fluorescent lamps to modern LED technology.

The drivers are optionally available with a constant output current of 500, 700, 1050 or 1400 mA and reach an efficiency of up to 85%. With their wide input voltage range of 90 to 295 V a.c. they are qualified for applications worldwide. To meet the requirements of EN61000-3-2 Class C the modules are equipped with active power correction, which also keeps the EMV load of the electricity grid low.

Since the RACD25 series is IP65 rated, it can be installed in moist facilities like garages or outdoor installations. The drivers are fully certified to EN61347 as well as UL8750 and come with a warranty of five years.

For more information contact Willem Schmidt, Arrow Altech Distribution, +27 (0)11 923 9600,[email protected], www.arrow.altech.co.za.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

High reliability memories
Altron Arrow DSP, Micros & Memory
Infineon’s mil-temp memories offer a wide selection of volatile and non-volatile memories for applications that meet QML-Q certifications and offer support for mil-aero applications.

Read more...
Altron celebrates 60th birthday with a call to rebuild Johannesburg
Altron Arrow News
Altron is celebrating its 60th birthday by honouring Johannesburg’s heritage and encouraging business, government and civil society to come together and respond to our President’s call to rebuild Johannesburg.

Read more...
Reference board for cardio monitoring
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The STDES-ESP01 reference board from STMicroelectronics demonstrates the capability of the ST1VAFE6AX and ST1VAFE3BX biosensors to detect ECG and SCG signals.

Read more...
ST MCUs extend ultra-low power innovation
Altron Arrow DSP, Micros & Memory
STMicroelectronics has introduced new STM32U3 microcontrollers with cutting-edge power-saving innovations that ease deployment of smart connected tech, especially in remote locations.

Read more...
Multicell battery monitoring
Altron Arrow Power Electronics / Power Management
The LTC6811 from Analog Devices is a multicell battery stack monitor that measures up to 12 series connected battery cells with a total measurement error of less than 1,2 mV.

Read more...
Innovative satellite navigation receiver
Altron Arrow Telecoms, Datacoms, Wireless, IoT
STMicroelectronics has released an innovative satellite navigation receiver to democratise precise positioning for automotive and industrial applications.

Read more...
Easy Nixie tube display
Dizzy Enterprises Opto-Electronics
MIKROE has launched Nixie Power Click, a booster Click board designed to provide high voltage for powering Nixie Tube (cold cathode display) shields.

Read more...
LED driver for industrial power supply indication
Altron Arrow Editor's Choice Circuit & System Protection
A simple and small solution for driving an LED to provide visual feedback in the presence/absence of a system’s power using a chip not originally designed for this purpose.

Read more...
High-voltage step-down DC-DC converter
Altron Arrow Power Electronics / Power Management
The MAX17793 is a high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated MOSFETs operating over an input voltage range of 3 to 80 V.

Read more...
High-speed SAR ADC simplifies design
Altron Arrow Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.

Read more...