Vishay has released two new series of 10 mm standard surface-mount 7-segment LED displays in compact, low profile packages. Utilising AllnGaP on GaAs chip technology for high luminous intensity to 2750 µcd , the VDMx10x0 and VDMx10A1 series displays are offered in super red, soft orange, yellow and green for a wide range of applications.
The devices offer evenly lighted, untinted segments and grey package surfaces. LED displays in the VDMx10A1 series feature common anode configurations and very low package heights of 2,1 mm. VDMx10x0 series devices are available in both common anode and cathode configurations and offer package heights of 3,75 mm.
The LED displays feature a ±50° angle of half intensity, maximum forward voltage of 2,6 V for low power consumption and are suitable for high peak currents up to 60 mA per segment. All devices are grouped by luminous intensity, while yellow, green and soft orange displays are also categorised by colour.
The VDMx10x0 and VDMx10A1 series provides designers with an alternative to leaded 7-segment displays in control units and panel meters for any device offering numeric digital readouts. Typical end products include test and measurement equipment, point of sale terminals, telecom systems, office equipment, consumer electronics and medical equipment.
PhotoMOS relays Future Electronics
Opto-Electronics
The AQY221R2SX and AQY221R2S PhotoMOS from Panasonic Industry ensures excellent characteristics and high-speed switching performance.
Read more...Mouser now shipping onsemi’s image sensors TRX Electronics
Opto-Electronics
The AR0145CS is a 1/4,3-inch CMOS digital image sensor with a 1280 (H) x 800 (V) active-pixel array that can capture both continuous video and single frames.
Read more...Adaptive optics’ power solution Altron Arrow
Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.
Read more...Ultra-high speed photo detection
Opto-Electronics
TDK Corporation has announced a photo-spintronic conversion element combining optical, electronic, and magnetic elements that can respond at an ultra-high speed of 20 picoseconds.
Read more...High-speed lasers RFiber Solutions
Opto-Electronics
Macom are a high-volume manufacturer of lasers, deploying more than 100 million devices with a reliability of less than 50 FIT and greater than 100 years of wear-out lifetime
Read more...High-performance optical interconnect
Opto-Electronics
STMicroelectronics has unveiled its next generation of proprietary technologies for higher-performing optical interconnect in datacentres and AI clusters.
Read more...First NVMe SSD Built with 8th-gen BiCS FLASH EBV Electrolink
Computer/Embedded Technology
KIOXIA recently announced the development and prototype demonstration of its new KIOXIA CM9 Series PCIe 5.0 NVMe SSDs, which incorporates CMOS directly Bonded to Array technology.
Read more...IMU with dual-sensing capability EBV Electrolink
Analogue, Mixed Signal, LSI
ST’s 6-axis inertial measurement unit integrates a dual accelerometer up to 320g and embedded AI for activity tracking and high-impact sensing.
Read more...Halo mid-board optical transceiver Spectrum Concepts
Opto-Electronics
The Samtec Halo mid-board transceiver has been designed for next-generation embedded applications that require 56 and 112 Gbps PAM4 performance in low profile and ruggedised form factors.
Read more...New generation of Ethernet media converters IOT Electronics
Opto-Electronics
Phoenix Contact is introducing three new families of media converters to the market, each designed for specific industrial environments and challenges.
printer friendly version