High-end LED applications such as exterior lighting, automotive electronics, traffic signs or incandescent lamp replacement, above all require superior luminous flux. Vishay, a long-term partner of EBV, developed the Telux series of high-brightness LEDs. Telux offers clear, nondiffused light, supreme heat dissipation, high operating temperatures and very small mechanical tolerances that allow precise use of external reflectors or lightguides.
The Telux series is a clear, nondiffused LED for high-end applications where supreme luminous flux is required. It is designed in an industry standard 7,62 mm square package utilising highly developed (AS) AllnGaP and InGaN technologies. The supreme heat dissipation of Telux allows applications at high ambient temperatures up to +125°C. (heat dissipation RthJP = 90 K/W). The LED type TLWR meets SAE and ECE colour requirements. To work in rough environments Telux LEDs withstand ESD voltage >2 kV according to Mil-Std-833D, Method 3015.7 for AllnGaP and voltages 1 kV for InGaN. All packing units are binned for luminous flux and colour to achieve best homogenous light appearance in applications like exterior lighting, dashboard illumination, tailstop and turn signals of motor vehicles. Telux LEDs are also good for replacement of incandescent lamps or traffic signals and signs.
PhotoMOS relays Future Electronics
Opto-Electronics
The AQY221R2SX and AQY221R2S PhotoMOS from Panasonic Industry ensures excellent characteristics and high-speed switching performance.
Read more...Mouser now shipping onsemi’s image sensors TRX Electronics
Opto-Electronics
The AR0145CS is a 1/4,3-inch CMOS digital image sensor with a 1280 (H) x 800 (V) active-pixel array that can capture both continuous video and single frames.
Read more...Adaptive optics’ power solution Altron Arrow
Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.
Read more...Ultra-high speed photo detection
Opto-Electronics
TDK Corporation has announced a photo-spintronic conversion element combining optical, electronic, and magnetic elements that can respond at an ultra-high speed of 20 picoseconds.
Read more...High-speed lasers RFiber Solutions
Opto-Electronics
Macom are a high-volume manufacturer of lasers, deploying more than 100 million devices with a reliability of less than 50 FIT and greater than 100 years of wear-out lifetime
Read more...High-performance optical interconnect
Opto-Electronics
STMicroelectronics has unveiled its next generation of proprietary technologies for higher-performing optical interconnect in datacentres and AI clusters.
Read more...First NVMe SSD Built with 8th-gen BiCS FLASH EBV Electrolink
Computer/Embedded Technology
KIOXIA recently announced the development and prototype demonstration of its new KIOXIA CM9 Series PCIe 5.0 NVMe SSDs, which incorporates CMOS directly Bonded to Array technology.
Read more...IMU with dual-sensing capability EBV Electrolink
Analogue, Mixed Signal, LSI
ST’s 6-axis inertial measurement unit integrates a dual accelerometer up to 320g and embedded AI for activity tracking and high-impact sensing.
Read more...Halo mid-board optical transceiver Spectrum Concepts
Opto-Electronics
The Samtec Halo mid-board transceiver has been designed for next-generation embedded applications that require 56 and 112 Gbps PAM4 performance in low profile and ruggedised form factors.
Read more...New generation of Ethernet media converters IOT Electronics
Opto-Electronics
Phoenix Contact is introducing three new families of media converters to the market, each designed for specific industrial environments and challenges.
printer friendly version