Circuit & System Protection


High current base-mount filters

12 September 2001 Circuit & System Protection

Recently added to Bulgin's filter range is an extensive selection of base-mounting types. These high current filters are designed largely for industrial applications, with current handling capabilities up to 20 A at 250 V a.c., 50-400 Hz.

Many different variations are available, including single and two-stage filtering, tab or stud terminations and three different case sizes. All are fully encapsulated and carry UL and VDE safety approvals.

The filters offer very good size to performance ratio, particularly the PS02 version 4 which measures only 45 x 22,5 x 18,5 mm (excluding tabs) but is rated up to 10 A, making this one of the smallest mains filters available in the marketplace.

The larger filters, PS02 versions 6 and 7, are designed for higher current applications, with 5, 10, 15 and 20 A models available. The PS04 range has two-stage filtering, providing additional attenuation where applications demand. Terminations are either push-on tabs or M4 studs, these give a very secure fixing, useful where equipment is subject to vibration.

Avnet Kopp

(011) 444 2333

[email protected]

www.avnet.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Electrical fire safety in lithium-ion battery rooms
Circuit & System Protection
Pratliperl is a non-combustible, ultra-lightweight aggregate that can be mixed with cement and applied as a plaster or screed to walls, floors, and ceilings.

Read more...
Clearing the Static: ESD training in the workplace
Actum Circuit & System Protection
To protect sensitive electronic components, A structured, consistent, and sustainable ESD training program is essential.

Read more...
Protect your pumps – protect your profit
NewElec Pretoria Circuit & System Protection
In South Africa’s demanding agricultural landscape, irrigation is not just an essential service – it is the heartbeat of farm productivity.

Read more...
Clearing the Static: ESD and installation: A durable antistatic solution
Actum Circuit & System Protection
ESD flooring provides a reliable, long-term solution for managing static electricity by safely dissipating static charges through the floor to a designated ground point.

Read more...
Why wait to automate
NewElec Pretoria Circuit & System Protection
NewElec’s initiative helps you gain operational visibility via HMI or PLC by retrofitting intelligent motor protection relays without replacing MCCs or rewiring the plant.

Read more...
Clearing the Static: Effectively control static in your workplace
Actum Circuit & System Protection
Controlling electrostatic discharge in the workplace is crucial to protect sensitive electronic equipment from damage. Implementing an ESD control program involves various measures and tests.

Read more...
Clearing the Static: Staying grounded: Ensuring effective ESD control
Actum Circuit & System Protection
To maintain reliable electrostatic discharge control, regular testing and accurate measurement are essential, with grounding products and ESD testing equipment being vital.

Read more...
Clearing the Static: ESD component safety in storage and transportation
Actum Circuit & System Protection
Conductive containers create a Faraday cage effect, safely channelling electrostatic charges away from the components inside.

Read more...
Clearing the Static: Conductive foot, heel and shoe grounders
Actum Circuit & System Protection
Conductive foot, heel and shoe grounders are used in electrostatic discharge protected areas to provide a path to ground for static electricity.

Read more...
LED driver for industrial power supply indication
Altron Arrow Editor's Choice Circuit & System Protection
A simple and small solution for driving an LED to provide visual feedback in the presence/absence of a system’s power using a chip not originally designed for this purpose.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved