The LT3905 is a fixed frequency, current mode step-up DC/DC converter designed to bias avalanche photodiodes (APD) in optical receivers.
The Linear Technology device features high-side APD current monitoring with over five decades of dynamic range and better than 2% relative accuracy over the 3 μA to 3 mA range.
The maximum APD current is programmed with a single resistor and a fast current limiter with indicator protects the APD during overload conditions. Adjustable output voltage provides dynamic bias control and a programmable loss-of-signal indicator flags low APD current. The power switch, Schottky diode, APD current monitor, current limit and loss-of-signal indicator are integrated into a single IC that is packaged in a 3 x 3 mm QFN.
The LT3905 operates at 1 MHz or 2 MHz switching frequency. Its internal 65 V, 350 mA high-efficiency switch offers output voltages as high as 60 V while its 2,7 V to 12 V input voltage range accommodates a wide range of input sources. Constant frequency architecture is used to minimise output noise. Other features include soft-start, internal compensation and programmable VIN under-voltage lockout.
Compact direct Time-of-Flight 3D LiDAR module Altron Arrow
Opto-Electronics Electronics Technology AI & ML
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.
Read more...Quality batteries are critical for IIoT Uniross Batteries
Power Electronics / Power Management
Batteries intended for use in industrial operations must indeed offer complete reliability under extreme environmental conditions, resistance to vibration and harsh environments.
Read more...12 kW hybrid inverter
Power Electronics / Power Management
Sungrow recently unveiled its next-generation residential energy storage solution, expanding its power range from 5 kW to 12 kW with the introduction of the new MG12RL hybrid inverter.
Read more...40 W and 75 W railway DC/DC converter Brabek
Power Electronics / Power Management
RECOM has announced two new cost-efficient DC/DC converters for the rail market with an ultra-wide 11:1 input range to cover all nominal input voltages from 24 to 110 V DC.
Read more...Power modules for solid-state transformers RS South Africa
Power Electronics / Power Management
Microchip’s new 3,3 kV silicon carbide modules deliver the required thermal performance and efficiency for SSTs to increase power available for token generation.
Read more...Solving South African power problems with locally built intelligence
Editor's Choice Power Electronics / Power Management
Smart metering infrastructure in South Africa remains patchy. The rollout has been slow, coverage is inconsistent, and for the most part, granular per-unit measurement simply does not exist.
Read more...Wide range power module
Power Electronics / Power Management
The latest DC-DC modules from Würth Elektronik are characterised by high resilience to voltage transients on the 24 V bus and an extremely wide input-voltage range from 3,5 V to 38 V.
Read more...Generating negative voltages from a positive supply Altron Arrow
Editor's Choice Passive Components
It is common for IoT devices, industrial sensors, meters, and medical equipment to require both a positive and negative voltage, and this article explains the options available to produce a negative rail from a positive rail supply.
Read more...Addressing latency and signal integrity challenges Altron Arrow
DSP, Micros & Memory
Strengthening Microchip Technology’s data centre solutions portfolio, its XpressConnect retimers support high-bandwidth architectures, while helping reduce integration complexity.
Read more...Precision timing in compact package Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Designed for use in harsh environments, the EX-423 incorporates a four-point mounted quartz crystal structure that improves shock resistance and reduces g-sensitivity.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version