Exar announced an addition to its range of telecommunications timing products with a new family of Universal Clocks.
The XR811xx series offers a wide range of output frequencies from 10 MHz to 1,5 GHz, with ultra-low phase noise jitter of less than 200 fs. Designed for communications, audio/video and industrial applications, the QFN-10 and TSSOP-8 packaged devices are footprint compatible with industry standard synthesisers.
The design of the XR811xx synthesisers utilises a highly flexible delta-sigma modulator and a very wide-ranging VCO in a PLL block that has been optimised to be highly power efficient; core current consumption is just 20 mA. The PLL can operate from either an input system clock or a crystal, and incorporates both an integer divider and a high-resolution (<1 Hz) fractional divider for increased flexibility to generate any clock frequency.
Additionally, up to four different frequency multiplier settings can be stored, allowing for different application configurations and providing BOM savings compared to multiple synthesisers. The XR811xx family also offers a choice of LVCMOS, LVDS or LVPECL output drivers.
Exar’s Universal Clock devices deliver sub-200 fs output phase noise jitter as integrated over a PLL loop bandwidth of 1,875 MHz – 20 MHz. This spans the requirements of most WAN and LAN systems and supports communications standards including 10 GHz Ethernet, 2,5 GHz and 10 GHz SONET/SDH/OTN, xDSL and PCIe, as well as many other synchronised clock system applications.
Ultra-low power MEMS accelerometer Altron Arrow
Analogue, Mixed Signal, LSI
Analog Devices’ ADXL366 is an ultra-low power, 3-axis MEMS accelerometer that consumes only 0,96 µA at a 100 Hz output data rate and 191 nA when in motion-triggered wake-up mode.
Read more...BT Audio 4 Click board Dizzy Enterprises
Analogue, Mixed Signal, LSI
The BT Audio 4 Click board from MIKROE provides high-quality wireless audio streaming and data comms over Bluetooth.
Read more...Precision MEMS IMU modules Altron Arrow
Analogue, Mixed Signal, LSI
The ADIS16575/ADIS16576/ADIS16577 from Analog Devices are precision, MEMS IMUs that includes a triaxial gyroscope and a triaxial accelerometer.
Read more...MEMS with embedded AI processing Altron Arrow
Analogue, Mixed Signal, LSI
STMicroelectronics has announced an inertial measurement unit that combines sensors tuned for activity tracking and high-g impact measurement into a single, space-saving package.
Read more...High-performance IMU RS South Africa
Analogue, Mixed Signal, LSI
TDK Corporation has announced availability of the new InvenSense SmartMotion ICM-536xx family of high-performance 6-axis IMUs.
Read more...High-temperature closed-loop MEMS accelerometer RS South Africa
Analogue, Mixed Signal, LSI
This sensor from TDK is a high-temperature MEMS accelerometer with ±14 g input range and a digital interface for measurement while drilling applications.
Read more...Dual accelerometers on the same die Altron Arrow
Analogue, Mixed Signal, LSI
The LSM6DSV320X is the first mainstream inertial sensor to house a gyroscope alongside two accelerometers, one capable of sensing up to ±16 g and one sensing up to a staggering ±320 g.
Read more...Dual-range IMU with edge processing EBV Electrolink
Analogue, Mixed Signal, LSI
ST’s innovative LSM6DSV80X combines two accelerometer structures for 16 g and 80 g full-scale sensing, a gyroscope up 4000 dps, and embedded intelligence in a single component.
Read more...High-reliability isolation amplifiers EBV Electrolink
Analogue, Mixed Signal, LSI
The VIA series of isolation amplifiers from Vishay are designed to deliver exceptional thermal stability and precise measurement capabilities.
Read more...Mibbo QT2C Series signal isolators Conical Technologies
Analogue, Mixed Signal, LSI
The Mibbo QT2C Series isolators support a rich combination of input and output signals, working with either current loops or voltage levels.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version