The ZSSC3027 from ZMDI is a 16-bit sensor signal conditioning IC (SSC) with an integrated 18-bit digital signal processor (DSP) for linearisation and calibration functions. It is optimised for high-resolution industrial, consumer and medical applications.
Special features for battery-driven, low-power devices include 930 μA typical overall current consumption, 20 nA typical sleep mode current, and a 1,7 to 3,6 V power supply range. The IC features an intelligent power saving scheme to ensure lowest overall current consumption and an internal sensor supply regulator with an excellent power supply rejection ratio (PSRR), eliminating the need for an external buffer capacitor.
Digital compensation of signal offset, sensitivity, temperature and non-linearity is accomplished via an internal correction algorithm with coefficients stored on-chip in a non-volatile, multiple-time programmable memory. Programming is simple via serial interface with the PC-controlled calibration software provided in ZMDI’s evaluation kit.
The measured and corrected bridge values are provided at the digital output pins as SPI or I²C. The device can also provide a corrected temperature output measured with an internal sensor.
The ZSSC3027’s output is an almost noise-free 16-bit signal, which is well suited for the design of high-precision measurement systems, including barometric altitude measurement used in portable navigation or emergency call systems, altitude measurement for car navigation, pressure measurements inside hard disks, and weather forecasting equipment. High-precision medical applications include medical gas control, medical infusion pumps, ambulatory non-invasive pump systems and occlusion detection systems.
The ZSSC3027 is in full production and is available as die for wafer bonding. Die, samples and wafers are available.
Ultra-low power MEMS accelerometer Altron Arrow
Analogue, Mixed Signal, LSI
Analog Devices’ ADXL366 is an ultra-low power, 3-axis MEMS accelerometer that consumes only 0,96 µA at a 100 Hz output data rate and 191 nA when in motion-triggered wake-up mode.
Read more...BT Audio 4 Click board Dizzy Enterprises
Analogue, Mixed Signal, LSI
The BT Audio 4 Click board from MIKROE provides high-quality wireless audio streaming and data comms over Bluetooth.
Read more...Precision MEMS IMU modules Altron Arrow
Analogue, Mixed Signal, LSI
The ADIS16575/ADIS16576/ADIS16577 from Analog Devices are precision, MEMS IMUs that includes a triaxial gyroscope and a triaxial accelerometer.
Read more...MEMS with embedded AI processing Altron Arrow
Analogue, Mixed Signal, LSI
STMicroelectronics has announced an inertial measurement unit that combines sensors tuned for activity tracking and high-g impact measurement into a single, space-saving package.
Read more...High-performance IMU RS South Africa
Analogue, Mixed Signal, LSI
TDK Corporation has announced availability of the new InvenSense SmartMotion ICM-536xx family of high-performance 6-axis IMUs.
Read more...High-temperature closed-loop MEMS accelerometer RS South Africa
Analogue, Mixed Signal, LSI
This sensor from TDK is a high-temperature MEMS accelerometer with ±14 g input range and a digital interface for measurement while drilling applications.
Read more...Dual accelerometers on the same die Altron Arrow
Analogue, Mixed Signal, LSI
The LSM6DSV320X is the first mainstream inertial sensor to house a gyroscope alongside two accelerometers, one capable of sensing up to ±16 g and one sensing up to a staggering ±320 g.
Read more...Dual-range IMU with edge processing EBV Electrolink
Analogue, Mixed Signal, LSI
ST’s innovative LSM6DSV80X combines two accelerometer structures for 16 g and 80 g full-scale sensing, a gyroscope up 4000 dps, and embedded intelligence in a single component.
Read more...High-reliability isolation amplifiers EBV Electrolink
Analogue, Mixed Signal, LSI
The VIA series of isolation amplifiers from Vishay are designed to deliver exceptional thermal stability and precise measurement capabilities.
Read more...Mibbo QT2C Series signal isolators Conical Technologies
Analogue, Mixed Signal, LSI
The Mibbo QT2C Series isolators support a rich combination of input and output signals, working with either current loops or voltage levels.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version