Power Electronics / Power Management


Converter bricks with 110 V input

16 July 2014 Power Electronics / Power Management

MTM Power is offering DC-DC converters in a brick case with an input of 110 V (66 - 160 V).

The PMD100 110WQB in a quarter-brick case (57,9 x 36,8 x 12,7 mm) has an output power of 100 W while the PMD150 110WHB in a half-brick case (57,9 x 61,0 x 12,7 mm) supplies 150 W. Output voltages are 5 V, 12 V or 24 V.

Housed in a plastic case with aluminium base plate, the parts boast efficiency up to 93% and operate across a temperature range of –40°C +100°C. Features include remote on/off control, external output voltage trimming, under-voltage lockout, continuous short circuit protection and over-voltage protection.

All models meet the safety requirements of UL 60 950-1 and EN 50 155 and comply with EN 61 373 as regards shock and vibration. With an external filter, the converters also meet the EMC requirements of EN 50 155 / EN 50 121-3-2 for use in railway applications.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

New compact AC-DC PSU series
Vepac Electronics Power Electronics / Power Management
COSEL has announced the expansion of its medical power offering with the addition of the new UMA series, the first three models being the 30 W UMA30F, the 60 W UMA60F and the 120 W UMA120F.

Read more...
hybridNETBOX instrumentation platform
Vepac Electronics Test & Measurement
The hybridNETBOX from Spectrum Instrumentation is an innovative instrumentation platform that combines a multi-channel arbitrary waveform generator (AWG) and a digitiser in a single portable unit.

Read more...
Power efficiency and robustness in electronics design
Power Electronics / Power Management
Mouser Electronics recently announced a new eBook in collaboration with Analog Devices highlighting essential strategies for optimising power systems.

Read more...
USB Type-C-powered controllers
Future Electronics Power Electronics / Power Management
Diodes Incorporated has released two USB Type-C PD 3.1 extended power range sink controllers that can be embedded into battery-powered devices.

Read more...
14-bit AWG at 20 GS/s
Vepac Electronics Test & Measurement
The Arb Rider AWG-7000 is the world’s fastest 14-bit Arbitrary Waveform Generator, featuring a 20 GS/s real time update rate and 14-bit vertical resolution.

Read more...
Multicell battery monitoring
Altron Arrow Power Electronics / Power Management
The LTC6811 from Analog Devices is a multicell battery stack monitor that measures up to 12 series connected battery cells with a total measurement error of less than 1,2 mV.

Read more...
Full telemetry in tiny DC-DC converters
RS South Africa Power Electronics / Power Management
The FS160* series of µPOL DC-DC converters from TDK all offer full telemetry, provide increased performance, and are remarkable for extraordinary power density in the smallest sizes.

Read more...
Power IC supplies 1650 W
EBV Electrolink Power Electronics / Power Management
Power Integrations has announced a two-fold increase in power output from the HiperLCS-2 chipset with the new device now being able to deliver up to 1650 W of continuous output power.

Read more...
High-voltage step-down DC-DC converter
Altron Arrow Power Electronics / Power Management
The MAX17793 is a high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated MOSFETs operating over an input voltage range of 3 to 80 V.

Read more...
Handheld RTSA up to 9,5 GHz
Vepac Electronics Test & Measurement
The PXE-90 implements an FFT engine on the built-in FPGA and support frame compression with trace detection while ensuring no missing samples between FFT frames.

Read more...