XP Power announced the HDS3000 series of 3000 Watt programmable AC/DC power supplies, comprising seven single-output models providing all the popular nominal output voltages from +12 to +60 V d.c. With efficiency up to 93%, they allow the output voltage or output current to be programmed from 0% to 105% of nominal output by a variety of means.
Digital communication can be made via I²C or RS-232 serial interfaces and analog controls include a 0 to +5 V d.c. input voltage or an external resistor. An output trim adjustment of ±5% of stated nominal via a potentiometer is also provided in order to compensate for wiring losses, or to accommodate a non-standard voltage requirement. An always-on standby output is also available and is user selectable between either 5 V d.c. / 0,5 A or 9 V d.c. / 0,3 A.
Despite its high output power, the HDS3000 is packaged in a chassis mount format measuring only 360 x 127 x 127 mm, including the bus bar output connectors and the variable speed fan. Using a variable speed fan helps keep energy consumption to a minimum, reduces acoustic noise when operating at low load conditions, and extends the lifetime of the fan.
Signal and other control functions include remote on/off, AC OK, remote sense and over-temperature shutdown. Up to five supplies can be configured in parallel to provide current share capability for increasing available power output or to build redundancy into the end system. A multicolour LED is used to indicate operational status through a combination of colour and flashing or constant illumination.
With its universal input range of 90 – 264 V a.c. the HDS3000 is suitable for worldwide use. There is no derating until below 100 V a.c. The supply complies with the internationally recognised UL/EN609501-1 safety standard for IT equipment and also meets Class A conducted and radiated EMI criteria as stipulated by EN55022.
The role of bidirectional charging in the evolving energy landscape Avnet Silica
Power Electronics / Power Management
As reliance on renewable sources like wind and solar continues to grow, the need for efficient energy flow and storage solutions has become more critical than ever.
Read more...SIGLENT launches new 8 GHz DSO Vepac Electronics
Test & Measurement
SIGLENT has unveiled the enhanced SDS7000A/AP models, building on the success of its SDS7000A high-resolution digital oscilloscope series.
Read more...How to calculate a buck converter’s inductance
Power Electronics / Power Management
In the buck circuit, the inductor design is a key element that is closely related to system efficiency, the output voltage ripple, and loop stability.
Read more...High-current EMI filters Accutronics
Power Electronics / Power Management
TDK has introduced 20 and 40 A, 80 V DC board-mount EMI filters, reducing differential mode conducted emissions for switching power supplies with high input current requirements.
Read more...Isolated SMD DC-DC converters iCorp Technologies
Power Electronics / Power Management
MinMax has launched a series of isolated SMD DC-DC converters, the MSU01 series delivering 1 W, while the MSU02 series offers 2 W output.
Read more...Mission-critical RF transceiver Vepac Electronics
Telecoms, Datacoms, Wireless, IoT
The Iris SQN9506 from Sequans Communications is a wide-band RF transceiver that operates from 220 MHz to 7,125 GHz.
Read more...Next-gen power meter Electrocomp Express
Power Electronics / Power Management
The VT-PWR-LV is a next-gen Vista Touch power meter from Trumeter for single, split, and three-phase systems.
Read more...Smallest 13th gen Intel SBC Vepac Electronics
Computer/Embedded Technology
At just 86 x 55 mm, the de next-RAP8 continues AAEON’s run of producing record-breaking single-board computers with embedded Intel technology.
Read more...Advanced PMIC for high-performance AI applications ASIC Design Services
Power Electronics / Power Management
Microchip Technology has announced the MCP16701, a Power Management Integrated Circuit (PMIC) designed to meet the needs of high-performance MPU and FPGA designers.
Read more...New SiC power MOSFET Future Electronics
Power Electronics / Power Management
STMicroelectronics’ SCT012H90G3AG is a robust, automotive-grade SiC MOSFET, engineered for demanding power electronics, featuring a 900?V drain-source voltage and exceptionally low on-resistance of 12?mO at 60?A.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version