COB LED for indoor and outdoor lighting
8 October 2014
Opto-Electronics
Having a light-emitting surface of only 6 mm in diameter, the new Soleriq P 6 is the smallest light-emitting diode (LED) in OSRAM Opto Semiconductors’ product family based on chip-on-board (CoB) technology.
With this new LED and an adapted version of Soleriq P 9, the company now offers two CoB LEDs with colour rendering index (CRI) of 80, which are suitable for outdoor lighting applications such as parking lots and walkways.
The P 6’s small light-emitting surface (LES) means that extremely compact and therefore lightweight optics can be fitted for highly compact spotlights. The spotlights can therefore be significantly smaller and more cost-effective, while still providing the same luminous intensity.
The luminous intensity for adequate pavement lighting, for example, can be achieved by just one Soleriq P 6. Implemented in outdoor applications such as parking lighting, the defined radiation area enables walkways to be perfectly illuminated and reduces light pollution. The LEDs are also highly resistant to corrosion caused by poor environmental conditions.
The CRI 80 version can be used in typical spotlights for directional indoor lighting as well. For shop and museum lighting in particular, the Soleriq P 6 is also available in a CRI 90 version.
LEDs based on chip-on-board technology are easy to process. The new P 6 does not require SMT soldering as part of the assembly process – adhesive or holders are sufficient. All of these accessories tailored for the product family are available on the market, including from experts in OSRAM’s partner network.
For more information contact Ryan Hunt, OSRAM Opto Semiconductors, +27 (0)79 525 1779, [email protected], www.osram-os.com
Further reading:
Compact direct Time-of-Flight 3D LiDAR module
Altron Arrow
Opto-Electronics Electronics Technology AI & ML
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.
Read more...
Easy to integrate, quick to react
Opto-Electronics
Würth Elektronik has expanded its range of WL-ICLEDs – RGB-LEDs with integrated controller – to include dual-wire ICLEDs.
Read more...
Industrial time-of-flight proximity sensor
EBV Electrolink
Opto-Electronics
STMicroelectronics’ VL53L4ED is a compact, high accuracy time-of-flight proximity sensor designed for industrial and embedded applications that require precise short range distance measurement.
Read more...
Flexible enclosure lighting solutions
IOT Electronics
Opto-Electronics
Phoenix Contact’s range of enclosure lights is designed to provide uniform illumination throughout control cabinets, while offering flexible installation and energy-efficient operation.
Read more...
Industry’s smallest laser firing system IC
Opto-Electronics
Silanna Semiconductor recently announced that its FirePower laser firing system ICs for smaller, more efficient LiDAR and rangefinder applications are available in production quantities.
Read more...
More light, greater efficiency, better growth
Würth Elektronik eiSos
Opto-Electronics
Würth Elektronik has expanded its WL-SMDC Horticulture product line with new LEDs with wavelengths of 450, 660, and 730 nm in the 3535 package.
Read more...
Intelligent control boosts tunnel safety
IOT Electronics
Opto-Electronics
Intelligent tunnel lighting systems are helping operators by delivering adaptive illumination that enhances both safety and energy efficiency.
Read more...
Case Study: Turning data into insight
Hamamatsu Photonics UK
Editor's Choice Opto-Electronics
Hamamatsu Photonics’ InGaAs PIN photodiode detector has proven consistent, reliable, and robust for more than a decade, helping Axetris to deliver stable, repeatable measurements.
Read more...
Reliable imaging for industrial applications
Vepac Electronics
Opto-Electronics
Combining a high-performance camera with an integrated high-speed processor, these compact systems enable advanced image sensing directly at the device level.
Read more...
Panasonic Industry launches its first flat lens, high-performing PIR sensor
Opto-Electronics
Panasonic Industry has announced the launch of its latest innovation in PIR motion sensors: the Flat Wide Detection Type (12 lens), being the first product incorporating its new PaPIRs+ technology.
Read more...