Opto-Electronics


Chip-on-board LEDs

4 February 2015 Opto-Electronics

New from Everlight Electronics are two chip-on-board (COB) LED families: the XUAN series of high-power devices and the Color Choice series CHI.

The 36 V XUAN series offers the dual benefit of high efficiency and easy assembly. Covering a wide wattage range from 2 to 50 W, the MCPCB device can achieve >130 lm/W. Designed with a highly thermally conductive mirror-aluminium substrate, it can be easily attached to a heatsink by holder or screws.

Another feature of the XUAN series is its wide driving operation range, ensuring very high efficacy in the typical driving state. In an over-driven state, however, it can still deliver a high lumen output and, with proper heatsink, also remains stable to bring about an economic lighting design. Seven different designs are currently available in 1313 and 1919 dimensions with colour temperature options from warm to cool (2700–6500 K) and CRI ratings of 82 (>80), 92 (>90) and >97 Ra. XUAN LEDs are a best fit for LED single light source applications like spotlights and downlights.

The Color Choice CHI COBs (9–29 W) are designed on a ceramic PCB package and based on two colour temperatures - 2700 K and 5700 K - which, when thoroughly mixed, can take on every ANSI colour temperature in this CCT range. All mixture points achieve >110 lm/W and a CRI in excess of 80.

The Color Choice series directly targets indoor retail, hospitality and residential lighting applications. Offered with wattages of 9 W, 19 W and 29 W, CHI LEDs can supplement direct luminaires and spotlights with dynamic colour temperature variability and allow the seamless setting of any desired colour temperature between 2700 K and 5700 K.

The CHI’s seamless colour temperature tunability is achieved by subdividing the COB into two electrically insulated segments for warm white 2700 K and cool white 5700 K, which can be controlled/driven independently from each other. Each circuit requires a separate power supply unit or a co-channel power supply. The COBs are suited for large spotlights in retail applications or smaller directional lamps like MR16, PAR20, PAR30, PAR38 lamps for general lighting use.

All chip-on-board LEDs from Everlight have completed LM80 lumen maintenance testing. A complete line of accessories such as standardised holders, appropriate reflectors and more are available.

For more information contact EBV Electrolink, +27 (0)21 402 1940, [email protected], www.ebv.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

PhotoMOS relays
Future Electronics Opto-Electronics
The AQY221R2SX and AQY221R2S PhotoMOS from Panasonic Industry ensures excellent characteristics and high-speed switching performance.

Read more...
Mouser now shipping onsemi’s image sensors
TRX Electronics Opto-Electronics
The AR0145CS is a 1/4,3-inch CMOS digital image sensor with a 1280 (H) x 800 (V) active-pixel array that can capture both continuous video and single frames.

Read more...
Adaptive optics’ power solution
Altron Arrow Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.

Read more...
Ultra-high speed photo detection
Opto-Electronics
TDK Corporation has announced a photo-spintronic conversion element combining optical, electronic, and magnetic elements that can respond at an ultra-high speed of 20 picoseconds.

Read more...
High-speed lasers
RFiber Solutions Opto-Electronics
Macom are a high-volume manufacturer of lasers, deploying more than 100 million devices with a reliability of less than 50 FIT and greater than 100 years of wear-out lifetime

Read more...
High-performance optical interconnect
Opto-Electronics
STMicroelectronics has unveiled its next generation of proprietary technologies for higher-performing optical interconnect in datacentres and AI clusters.

Read more...
First NVMe SSD Built with 8th-gen BiCS FLASH
EBV Electrolink Computer/Embedded Technology
KIOXIA recently announced the development and prototype demonstration of its new KIOXIA CM9 Series PCIe 5.0 NVMe SSDs, which incorporates CMOS directly Bonded to Array technology.

Read more...
IMU with dual-sensing capability
EBV Electrolink Analogue, Mixed Signal, LSI
ST’s 6-axis inertial measurement unit integrates a dual accelerometer up to 320g and embedded AI for activity tracking and high-impact sensing.

Read more...
Halo mid-board optical transceiver
Spectrum Concepts Opto-Electronics
The Samtec Halo mid-board transceiver has been designed for next-generation embedded applications that require 56 and 112 Gbps PAM4 performance in low profile and ruggedised form factors.

Read more...
New generation of Ethernet media converters
IOT Electronics Opto-Electronics
Phoenix Contact is introducing three new families of media converters to the market, each designed for specific industrial environments and challenges.

Read more...