Eight-channel high-side switch
4 February 2015
Power Electronics / Power Management
The MAX14900E from Maxim Integrated is an octal power switch that features per-channel configuration for high-side or push-pull operation. Fast load switching with low propagation delay makes the device suitable for high-speed PLC systems, high-density digital output modules, motor controllers and PWM/PPO control.
Each high-side switch sources 850 mA continuous current with a low 165 mΩ on-resistance at 500 mA and 125°C. These switches feature 2 μs (maximum) input-to-output propagation delay when driving resistive loads. Long cables can be driven with switching rates of up to 100 kHz for PWM/PPO control in push-pull operation. Multiple high-side switches can be connected in parallel to achieve higher drive currents.
The IC is configured, monitored and driven by an SPI and/or parallel interface. In parallel mode, eight logic inputs directly control the outputs and the serial interface can be used for configuration/monitoring. Serial mode utilises the serial interface for both setting and configuration, and features CRC error detection to ensure robust SPI communication. The device features a global diagnostics output as well as per-channel diagnostics and monitoring through the serial interface.
The MAX14900E features a wide supply input range of 10 V to 36 V, with current limiting and per-channel thermal shutdown protecting each switch/driver. It is available in a thermally enhanced 48-pin (7 x 7 mm), side-wettable flank QFN-EP or standard 48-pin TQFN-EP package, and is specified over the -40°C to +125°C temperature range.
For more information contact Arnold Perumal, Avnet Kopp, +27 (0)11 319 8600, [email protected], www.avnet.co.za
Further reading:
NVDC power-path control to 1– 6 cell battery systems
iCorp Technologies
Power Electronics / Power Management
SG Micro’s SGM41581 is an I2C-controlled narrow voltage direct charging buck boost charge controller designed to simplify robust power delivery in systems that must seamlessly operate from an adapter input or a battery pack.
Read more...
Precise, adaptive battery health-monitoring
RS South Africa
Power Electronics / Power Management
New fuel gauge solution from Nordic delivers State-of-Health reporting, adaptive battery modelling, and seamless fleet observability via nRF Cloud.
Read more...
Compact 6 A automotive buck converter
Altron Arrow
Power Electronics / Power Management
Delivering up to 6 A of continuous output current, the DCP0606Y from STMicroelectronics enables efficient regulation of low-voltage rails commonly used in modern vehicle electronics and industrial systems.
Read more...
The new role of UPS technology in high-precision automation
Omron Electronics
Power Electronics / Power Management
OMRON’s BU_2SW and BU_2RWL series UPS systems are engineered to offer a robust, online type power architecture designed to safeguard sensitive AC powered systems across a wide range of industries.
Read more...
Rugged railway-grade DC-DC power modules
iCorp Technologies
Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.
Read more...
Four-quadrant regenerative grid simulator
Conical Technologies
Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.
Read more...
90 W PSU with 150% boost capability
Brabek
Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.
Read more...
Standalone USB PD controller
Future Electronics
Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.
Read more...
Power module enhances AI data centre power density
Altron Arrow
Power Electronics / Power Management
Microchip’s MCPF1525 power module with PMBus delivers 25 A DC-DC power and is stackable up to 200 A.
Read more...
MIL-Spec DC-DC power converters
Vepac Electronics
Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.
Read more...