High-power LED light source

18 March 2015 Opto-Electronics

The P 13 is the highest-powered LED in Osram Opto Semiconductors’ Soleriq P series and is available in two versions with different colour rendering indexes (CRI).

The CRI 80 LED delivers a brightness of 4000 lm even at high temperatures (85°C, 1050 mA) and can be overdriven to deliver up to 6800 lm. This high brightness is achieved with a small light-emitting surface, only 13,5 mm in diameter. The whole package measures 18 x 18 x 1,5 mm, facilitating compact and bright lighting solutions for indoor spotlights and high bay lighting.

For ambitious spotlight applications ­demanding high colour quality, small beam angles and high lumen output, the CRI 90 version delivers 3300 lm as standard and up to 5600 lm in overdriven conditions.

The P 13’s small light-emitting surface permits a simpler lens design which costs less and enables more compact lighting solutions. Binning of the LEDs takes place at 85°C (‘hot binning’) so that normal operating conditions are very closely matched and the brightness and colour values of the LEDs can be precisely determined in line with their subsequent use.

For more information contact Petrus Booyens, Osram Opto Semiconductors, +27 (0)79 525 1779, [email protected], www.osram-os.com

Further reading:

Compact direct Time-of-Flight 3D LiDAR module
Altron Arrow Opto-Electronics Electronics Technology AI & ML
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.

Read more...

---

Easy to integrate, quick to react
Opto-Electronics
Würth Elektronik has expanded its range of WL-ICLEDs – RGB-LEDs with integrated controller – to include dual-wire ICLEDs.

Read more...

---

Industrial time-of-flight proximity sensor
EBV Electrolink Opto-Electronics
STMicroelectronics’ VL53L4ED is a compact, high accuracy time-of-flight proximity sensor designed for industrial and embedded applications that require precise short range distance measurement.

Read more...

---

Flexible enclosure lighting solutions
IOT Electronics Opto-Electronics
Phoenix Contact’s range of enclosure lights is designed to provide uniform illumination throughout control cabinets, while offering flexible installation and energy-efficient operation.

Read more...

---

Industry’s smallest laser firing system IC
Opto-Electronics
Silanna Semiconductor recently announced that its FirePower laser firing system ICs for smaller, more efficient LiDAR and rangefinder applications are available in production quantities.

Read more...

---

More light, greater efficiency, better growth
Würth Elektronik eiSos Opto-Electronics
Würth Elektronik has expanded its WL-SMDC Horticulture product line with new LEDs with wavelengths of 450, 660, and 730 nm in the 3535 package.

Read more...

---

Intelligent control boosts tunnel safety
IOT Electronics Opto-Electronics
Intelligent tunnel lighting systems are helping operators by delivering adaptive illumination that enhances both safety and energy efficiency.

Read more...

---

Case Study: Turning data into insight
Hamamatsu Photonics UK Editor's Choice Opto-Electronics
Hamamatsu Photonics’ InGaAs PIN photodiode detector has proven consistent, reliable, and robust for more than a decade, helping Axetris to deliver stable, repeatable measurements.

Read more...

---

Reliable imaging for industrial applications
Vepac Electronics Opto-Electronics
Combining a high-performance camera with an integrated high-speed processor, these compact systems enable advanced image sensing directly at the device level.

Read more...

---

Panasonic Industry launches its first flat lens, high-performing PIR sensor
Opto-Electronics
Panasonic Industry has announced the launch of its latest innovation in PIR motion sensors: the Flat Wide Detection Type (12 lens), being the first product incorporating its new PaPIRs+ technology.

Read more...

---