TDK has released new EPCOS SMT transponder coils with extremely compact dimensions. Measuring just 4,5 x 3,2 x 3,2 mm, the TC1812 has an inductance of 2,38 mH and is designed for operation in the Z-axis. The TC1210 coil is available with an inductance value of 1,08 mH or 1,34 mH, depending on type, and is suitable for operation in either the X- or Y-axis. Both TC1210 versions are said to be the smallest transponder coils in the world as they measure just 3,2 x 2,5 x 2,2 mm.
Thanks to their reduced dimensions, it was also possible to reduce the mass of the components by about a third compared to their predecessors. For example, the TC1210 (B82450A1084C000) weighs just 50 mg, while the TC1812 (B82451A2384D000) weighs only 120 mg. This makes them an excellent choice for tyre pressure monitoring systems (TPMS). These applications demand especially robust, low-mass components due to the high acceleration forces that are encountered. The terminals of the windings are laser-welded and provide high mechanical stability.
The TC1210 has a high sensitivity of 3,1 mV/μT or 3,5 mV/μT, depending on the type, while the TC1812 offers a sensitivity of 7,6 mV/μT. They are all designed for a centre frequency of 125 kHz, comply with the AEC-Q200 standard and are RoHS compatible.
Cooling solutions for modern electronics Future Electronics
Passive Components
As electronic systems become more compact and powerful, effective thermal management has become a critical aspect of product design.
Read more...DC-link capacitors with ultra-low inductance Electrocomp
Passive Components
TDK Corporation recently released its new series of MKP DC high-frequency film capacitors, a high-performance DC link capacitor platform for next-generation SiC-based power electronics.
Read more...Generating negative voltages from a positive supply Altron Arrow
Editor's Choice Passive Components
It is common for IoT devices, industrial sensors, meters, and medical equipment to require both a positive and negative voltage, and this article explains the options available to produce a negative rail from a positive rail supply.
Read more...Non-contact linear position sensor Electrocomp
Test & Measurement
The Vishay 40 LHE Linear Position Sensor, designed for industrial motion control and automation, delivers robust, non-contact measurement performance using Hall effect technology.
Read more...High-precision thick-film resistors Avnet Silica
Passive Components
The new Panasonic ERJPC high precision thick-film resistors series deliver accuracy levels previously only achievable with thin film technology, offering customers higher power density and cost-effective performance.
Read more...Semi-shielded power inductors RS South Africa
Passive Components
The SDCx family from Eaton includes the SDCL and SDCH series of semi-shielded power inductors designed for reliable performance in consumer, industrial, energy, and medical applications.
Read more...Compact high-current power inductor EBV Electrolink
Passive Components
Vishay’s IHLP series power inductors deliver high current capability in an ultra-low profile, magnetically shielded design.
Read more...Tiny noise suppression filters RS South Africa
Passive Components
TDK Corporation recently announced its latest noise suppression filters of the MAF0603GWY series, which measure only 0,6 x 0,3 x 0,3 mm.
Read more...Compact 1250 V choke solution Electrocomp
Passive Components
TDK Corporation has introduced a new high-voltage common-mode choke series designed to support more compact and efficient 1250 V DC converter architectures in next-generation power electronics.
Read more...Tiny power inductor for low noise applications iCorp Technologies
Passive Components
With the evolution of Bluetooth, chips, sensors and other technologies, the design of TWS earphones is becoming smaller and thinner, and the performance and size requirements of integrated inductors need to follow suit.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version