Circuit & System Protection


Single-line ESD protection diode

20 May 2015 Circuit & System Protection

Measuring only 0,6 mm by 0,3 mm with a very low height of 0,27 mm, the VBUS05B1-SD0 offers ultra-low capacitance and leakage current for the protection of high-speed data lines and antennas against transient voltage signals.

The device’s chip-level package in the 0603 case size is one of the smallest in the industry, requiring three times less board space than packages in the 1006 case size. Due to its short leads and small package size, the diode’s line inductance is very low, allowing fast transients such as an ESD strike to be clamped with minimal over- or under-shoots.

With very low load capacitance of 0,29 pF typical and 0,4 pF maximum, the VBUS05B1-SD0 can be used for the protection of high-speed data ports like HDMI, USB 3.0 and Thunderbolt. It features a low maximum leakage current of < 0,1 A at the working voltage of 5,5 V, a breakdown voltage of 8,8 V typical at 1 mA, and a maximum clamping voltage of 18 V at 2,5 A.

For more information contact EBV Electrolink, +27 (0)21 402 1940, [email protected], www.ebv.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Chip provides concurrent dual connectivity
EBV Electrolink Telecoms, Datacoms, Wireless, IoT
The IW693 from NXP is a 2x2 dual-band, highly integrated device that provides concurrent dual Wi-Fi 6E + Wi-Fi 6 and Bluetooth connectivity, supporting four different modes.

Read more...
Clearing the Static: ESD and installation: A durable antistatic solution
Actum Circuit & System Protection
ESD flooring provides a reliable, long-term solution for managing static electricity by safely dissipating static charges through the floor to a designated ground point.

Read more...
Why wait to automate
NewElec Pretoria Circuit & System Protection
NewElec’s initiative helps you gain operational visibility via HMI or PLC by retrofitting intelligent motor protection relays without replacing MCCs or rewiring the plant.

Read more...
Dual-range IMU with edge processing
EBV Electrolink Analogue, Mixed Signal, LSI
ST’s innovative LSM6DSV80X combines two accelerometer structures for 16 g and 80 g full-scale sensing, a gyroscope up 4000 dps, and embedded intelligence in a single component.

Read more...
Clearing the Static: Effectively control static in your workplace
Actum Circuit & System Protection
Controlling electrostatic discharge in the workplace is crucial to protect sensitive electronic equipment from damage. Implementing an ESD control program involves various measures and tests.

Read more...
High-reliability isolation amplifiers
EBV Electrolink Analogue, Mixed Signal, LSI
The VIA series of isolation amplifiers from Vishay are designed to deliver exceptional thermal stability and precise measurement capabilities.

Read more...
First NVMe SSD Built with 8th-gen BiCS FLASH
EBV Electrolink Computer/Embedded Technology
KIOXIA recently announced the development and prototype demonstration of its new KIOXIA CM9 Series PCIe 5.0 NVMe SSDs, which incorporates CMOS directly Bonded to Array technology.

Read more...
IMU with dual-sensing capability
EBV Electrolink Analogue, Mixed Signal, LSI
ST’s 6-axis inertial measurement unit integrates a dual accelerometer up to 320g and embedded AI for activity tracking and high-impact sensing.

Read more...
Clearing the Static: Staying grounded: Ensuring effective ESD control
Actum Circuit & System Protection
To maintain reliable electrostatic discharge control, regular testing and accurate measurement are essential, with grounding products and ESD testing equipment being vital.

Read more...
Clearing the Static: ESD component safety in storage and transportation
Actum Circuit & System Protection
Conductive containers create a Faraday cage effect, safely channelling electrostatic charges away from the components inside.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved