Surge-resilient wirewound resistors
20 May 2015
Passive Components
Vishay introduced a new series of silicone-coated, axial lead wirewound resistors.
Providing enhanced short-term surge protection compared with standard wirewound devices, Dale CW – High Surge series resistors combine high-voltage surge immunity up to 12 kV with high-temperature operation to +350°C in a high-reliability design.
The components provide overload and high surge voltage protection in accordance to IEC 61000-4-5 (1,2 μs/50 μs) requirements for power supplies, metering and welding equipment, power tools and appliances in a wide range of applications. They have a rugged, completely welded construction for increased reliability, while their high-temperature silicone coating allows for operating temperature ranges of -65°C to +250°C (characteristic U) and -65°C to +350°C (characteristic V).
The compact resistors provide high power ratings from 1 W to 13 W at 25°C and 2000 hour load-life stability of less than ±3% at +25°C. They come in resistances from 0,1 Ω to 167 kΩ, with tolerances of ±3%, ±5% and ±10%, and TCR of ±90 ppm/°C for resistance below 0,99 Ω, ±50 ppm/°C for resistance from 1,0 Ω to 9,9 Ω, and ±30 ppm/°C for resistance of 10 Ω and above.
The CW - High Surge series is available with both lead-free and tin/lead terminations.
For more information contact Yolandi de Beer, Avnet South Africa, +27 (0)11 319 8600, [email protected], www.avnet.co.za
Further reading:
Compact high-current power inductor
EBV Electrolink
Passive Components
Vishay’s IHLP series power inductors deliver high current capability in an ultra-low profile, magnetically shielded design.
Read more...
Tiny noise suppression filters
RS South Africa
Passive Components
TDK Corporation recently announced its latest noise suppression filters of the MAF0603GWY series, which measure only 0,6 x 0,3 x 0,3 mm.
Read more...
Compact 1250 V choke solution
Electrocomp
Passive Components
TDK Corporation has introduced a new high-voltage common-mode choke series designed to support more compact and efficient 1250 V DC converter architectures in next-generation power electronics.
Read more...
Tiny power inductor for low noise applications
iCorp Technologies
Passive Components
With the evolution of Bluetooth, chips, sensors and other technologies, the design of TWS earphones is becoming smaller and thinner, and the performance and size requirements of integrated inductors need to follow suit.
Read more...
High-endurance polymer tantalum capacitors
Passive Components
Panasonic Industry TDC Series POSCAP polymer tantalum capacitors deliver high endurance and reliable performance in demanding, high-temperature environments.
Read more...
Thin-film inductors for optical transceivers
RS South Africa
Passive Components
TDK has expanded its PLEC69B series (1,2 x 0,6 x 0,95 mm – L x W x H) of thin-film inductors, used for separating the data signal from the power in optical transceivers in AI data centres.
Read more...
Low-resistance MLCCs
RS South Africa
Passive Components
TDK Corporation has expanded its CN series of low-resistance soft-termination multilayer ceramic capacitors; achieving 22 nF capacitance in the 3225 case size.
Read more...
Ferrite cores with different shapes
RS South Africa
Passive Components
TDK Corporation has introduced a variety of new large-size ferrite cores with different core shapes, making this the industry’s largest lineup of shapes, sizes, and materials for such large cores.
Read more...
Vibration-resistant axial capacitors
RS South Africa
Passive Components
TDK Corporation has unveiled the B41699 and B41799 series of ultra-compact aluminium electrolytic capacitors, engineered to withstand operating temperatures of up to 140°C.
Read more...
Capacitors for demanding industrial applications
Passive Components
TDK Corporation has announced its X1 capacitors of the EPCOS B3291xH/J4 series for power line filtering of electromagnetic interferences in demanding automotive and industrial applications with a rated AC voltage of up to 480 V.
Read more...
printer friendly version