Regulated DC-DC converters
10 June 2015
Power Electronics / Power Management
Vicor announced the expansion of the DCM converter module series of isolated, regulated DC-DC converters within its Converter housed in Package (ChiP) power component platform. This series now covers critical applications in aerospace, hybrid and electric vehicles, rugged systems, industrial and telecom/datacom.
DCMs provide nominal input voltages of 24, 28, 48, 270, 290 and 300 V with nominal outputs of 48, 36, 28, 24, 15, 12 and 5 V, and are available in packages with up to 600 Watts of power. They can be coupled with Vicor FPA and/or ZVS regulators to enable full power solutions that deliver dense, efficient and scalable source-to-load power.
The devices’ DC-ZVS topology achieves typical efficiency up to 93%. Up to eight of them can be paralleled in an array without derating or additional circuitry. When configured in such an array, up to a 4,8 kW DC-DC solution can be achieved.
The modules are available in two through-hole packages: a 4623 (46 x 23 mm) ChiP package capable of up to 600 W of power and a 3623 (36 x 23 mm) ChiP package capable of up to 320 W of power.
For more information contact ECS, +27 (0)12 345 6132, [email protected], www.ecssa.co.za
Further reading:
Rugged railway-grade DC-DC power modules
iCorp Technologies
Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.
Read more...
Four-quadrant regenerative grid simulator
Conical Technologies
Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.
Read more...
90 W PSU with 150% boost capability
Brabek
Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.
Read more...
Standalone USB PD controller
Future Electronics
Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.
Read more...
Power module enhances AI data centre power density
Altron Arrow
Power Electronics / Power Management
Microchip’s MCPF1525 power module with PMBus delivers 25 A DC-DC power and is stackable up to 200 A.
Read more...
MIL-Spec DC-DC power converters
Vepac Electronics
Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.
Read more...
Compact power MOSFET for high current switching
Future Electronics
Power Electronics / Power Management
onsemi’s NTMFSC2D6N08X is a high-performance 80 V N-channel power MOSFET engineered for demanding switching and power conversion applications.
Read more...
DC link capacitors for demanding applications
RS South Africa
Power Electronics / Power Management
TDK Corporation has announced the B3271xP series of DC link film capacitors, offering high thermal robustness for demanding automotive and industrial power electronics.
Read more...
N-channel power MOSFETs
TRX Electronics
Power Electronics / Power Management
The TSM2N7002 series from Taiwan Semiconductor are logic-level N-channel power MOSFETs designed with low drain-source on-state resistance, reducing conduction losses and improving efficiency in switching applications.
Read more...
Smart power protection, simplified
TRX Electronics
Power Electronics / Power Management
onsemi electronic fuses (eFuses) deliver integrated, intelligent protection by combining overcurrent, overvoltage, over-temperature, reverse polarity, and inrush current safeguards in a single compact IC.
Read more...