Opto-Electronics


High-power LED for lighting

22 July 2015 Opto-Electronics

Duris S 10, the latest addition to the chip array SMD (CAS) family from OSRAM Opto Semiconductors, is characterised by high efficiency, high light output and uniform colour appearance.

Efficient surface mounted device (SMD) technology makes assembly simple and leads to cost savings of up to 30% in system and optic designs, depending on the particular application. The LED has a compact footprint and is available in two output classes of up to 1400 lumens, simplifying the design of lamps and luminaires, and is ideal for use in spotlights, down lights, directional and omnidirectional retrofits.

The lumen packages were chosen specifically for standard applications, such as MR16 retrofits, and enable the creation of lamp and luminaire designs on the basis of a single Duris S 10. This helps prevent multiple shadow effects – an advantage over frequently used multi-LED clusters.

Both single-spot versions have the same footprint of 7 x 7 mm, offering flexibility in the design of compact luminaires with high luminous flux. The small size of the LED and simplified design of the optics makes it easier to integrate standard accessories such as lenses and reflectors.

These new CAS parts are binned according to the familiar MacAdam ellipses, resulting in a uniform colour appearance. In view of the surface-mounted design of the LED, a printed circuit board (PCB) must be incorporated in the luminaire. This opens up numerous design options such as integrating thermal fuses, connectors or driver components on the LED board.

For more information contact Petrus Booyens, OSRAM Opto Semiconductors, +27 (0)79 525 1779, [email protected], www.osram-os.com





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

PhotoMOS relays
Future Electronics Opto-Electronics
The AQY221R2SX and AQY221R2S PhotoMOS from Panasonic Industry ensures excellent characteristics and high-speed switching performance.

Read more...
Mouser now shipping onsemi’s image sensors
TRX Electronics Opto-Electronics
The AR0145CS is a 1/4,3-inch CMOS digital image sensor with a 1280 (H) x 800 (V) active-pixel array that can capture both continuous video and single frames.

Read more...
Adaptive optics’ power solution
Altron Arrow Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.

Read more...
Ultra-high speed photo detection
Opto-Electronics
TDK Corporation has announced a photo-spintronic conversion element combining optical, electronic, and magnetic elements that can respond at an ultra-high speed of 20 picoseconds.

Read more...
High-speed lasers
RFiber Solutions Opto-Electronics
Macom are a high-volume manufacturer of lasers, deploying more than 100 million devices with a reliability of less than 50 FIT and greater than 100 years of wear-out lifetime

Read more...
High-performance optical interconnect
Opto-Electronics
STMicroelectronics has unveiled its next generation of proprietary technologies for higher-performing optical interconnect in datacentres and AI clusters.

Read more...
Halo mid-board optical transceiver
Spectrum Concepts Opto-Electronics
The Samtec Halo mid-board transceiver has been designed for next-generation embedded applications that require 56 and 112 Gbps PAM4 performance in low profile and ruggedised form factors.

Read more...
New generation of Ethernet media converters
IOT Electronics Opto-Electronics
Phoenix Contact is introducing three new families of media converters to the market, each designed for specific industrial environments and challenges.

Read more...
PIN photodiode with integrated lens
RFiber Solutions Opto-Electronics
The MARP-BP112 from Macom is a backside-illuminated PIN photodiode, usable from 1200 nm to 1650 nm, that is optimised for use in 112 GBaud PAM4 applications.

Read more...
RGBIR sensor with I2C interface
Electrocomp Opto-Electronics
Available in a miniature opaque 2,67 x 2,45 mm package, Vishay’s VEML6046X00 includes high-sensitivity photodiodes, a low noise amplifier, and a 16-bit analogue to digital converter.

Read more...