Power Electronics / Power Management


Drivers for chip-on-board LEDs

22 July 2015 Power Electronics / Power Management Opto-Electronics

The new RCOB LED driver series was developed to meet the requirements of COB (chip-on-board) LEDs. The range includes 11 models with output voltages between 25 and 44 V d.c. and constant output currents of 350 to 1050 mA.

The drivers are affordable, come with active power factor correction (>0,95) and achieve efficiencies as high as 90%. Thanks to their compact and flat design (106 x 67 x 22 mm) they can be integrated into almost any type of lighting system, while the fact that the inputs and outputs are located on the same side further simplifies installation. The drivers of version RCOB-A come with a 1 to 10 V input and can be dimmed from 0% to 100%.

Supplied with a three-year warranty, the devices are designed for a 230 V a.c. input and can operate between -20°C and +50°C. A number of safety features protect the units against short circuits, overload, over-voltage and over-temperature.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

New compact AC-DC PSU series
Vepac Electronics Power Electronics / Power Management
COSEL has announced the expansion of its medical power offering with the addition of the new UMA series, the first three models being the 30 W UMA30F, the 60 W UMA60F and the 120 W UMA120F.

Read more...
Power efficiency and robustness in electronics design
Power Electronics / Power Management
Mouser Electronics recently announced a new eBook in collaboration with Analog Devices highlighting essential strategies for optimising power systems.

Read more...
USB Type-C-powered controllers
Future Electronics Power Electronics / Power Management
Diodes Incorporated has released two USB Type-C PD 3.1 extended power range sink controllers that can be embedded into battery-powered devices.

Read more...
Multicell battery monitoring
Altron Arrow Power Electronics / Power Management
The LTC6811 from Analog Devices is a multicell battery stack monitor that measures up to 12 series connected battery cells with a total measurement error of less than 1,2 mV.

Read more...
Full telemetry in tiny DC-DC converters
RS South Africa Power Electronics / Power Management
The FS160* series of µPOL DC-DC converters from TDK all offer full telemetry, provide increased performance, and are remarkable for extraordinary power density in the smallest sizes.

Read more...
Power IC supplies 1650 W
EBV Electrolink Power Electronics / Power Management
Power Integrations has announced a two-fold increase in power output from the HiperLCS-2 chipset with the new device now being able to deliver up to 1650 W of continuous output power.

Read more...
High-voltage step-down DC-DC converter
Altron Arrow Power Electronics / Power Management
The MAX17793 is a high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated MOSFETs operating over an input voltage range of 3 to 80 V.

Read more...
High-voltage contactors
RS South Africa Power Electronics / Power Management
TDK Corporation has announced two new additions to its high-voltage contactor portfolio for harsh environments: the HVC43MC with integrated mirror contact and the HVC45 with enhanced short-circuit current handling capability.

Read more...
Chokes rated at 36 A
RS South Africa Power Electronics / Power Management
TDK Corporation has launched the EPCOS SurfIND series, a new range of current-compensated ring core double chokes for high currents and surface mounting.

Read more...
RF arrestor provides robust protection
RFiber Solutions Power Electronics / Power Management
NexTek’s range of coaxial RF surge and lightning arrestors are designed and built to provide robust protection for any radio or coaxial RF transmission application.

Read more...