Multiproduct calibrator offers value

24 October 2001 Test & Measurement

Fluke's 9100 calibration system offers superior performance in both the analog and digital domain. It allows one to efficiently calibrate a wide range of test and measurement equipment to ISO 9000 requirements.

The Model 9100's unique procedure mode guides operators step-by-step through the entire calibration process, allowing swifter calibration. This multifunction calibrator has a high specification variety of outputs. In addition to DC and AC voltage to 1050 V, variable resistance to 400 MOhm and DC and AC current to 20 A (1000 A via the optional current coils), the Fluke 9100 delivers continuously variable capacitance values to 40 µF and conductance values to 2,5 milliSiemens. It also generates digitally synthesized and phase-locked sine, square, triangle, impulse and trapezoidal waveforms, variable amplitude pulses to 10 MHz, pulse widths to 2 s, and duty cycles between 0,05 and 99,95%.

Two oscilloscope calibration options enables it to generate all the waveforms required to calibrate oscilloscopes up to 250 or 600 MHz. The insulation/continuity tester option and it synthesizes resistance values as high as 2 GOhm at test voltages up to 1000 V. Fit the power meter option and it simultaneously generates variable phase angle voltages and currents that allow one to calibrate power meters up to 1 MW or 1 MVAR.

At 18,5 kg in weight it is ideal for on-site calibration.

Further reading:

Analyser and voltmeter capability added to portable instruments
Tamashi Technology Investments Test & Measurement
Anritsu Company had added Vector Network Analyzer and Vector Voltmeter measurements to their industry standard Site Master instruments.

Read more...

---

Marktech’s latest LEDs and photodiodes
NuVision Electronics Test & Measurement
Designed for precision sensing and emission tasks, Marktech’s optoelectronic lineup serves medical, industrial, aerospace, and environmental markets.

Read more...

---

MEMS air quality sensor
Future Electronics Test & Measurement
Bosch Sensortec’s BME690 is the latest-generation gas sensor that combines advanced monitoring capabilities with innovative artificial intelligence functionality.

Read more...

---

Telemetry retrofit for sustainable resource management
CST Electronics Test & Measurement
AquaMeter is a cost-effective secure telemetry retrofit that can easily be added to hundreds of millions of legacy mechanical water meters.

Read more...

---

True-RMS clamp meter measures 2500 A
Comtest Test & Measurement
The Fluke 376 FC True-RMS Clamp Meter with iFlex is the most advanced troubleshooting tool for industrial and commercial electricians.

Read more...

---

Latest wireless barcode scanner
Brady Corporation Test & Measurement
Brady has launched its new barcode scanner, the CR2100, which is a wireless handheld scanner utilising Bluetooth 5 LE for communication with a host device.

Read more...

---

hybridNETBOX instrumentation platform
Vepac Electronics Test & Measurement
The hybridNETBOX from Spectrum Instrumentation is an innovative instrumentation platform that combines a multi-channel arbitrary waveform generator (AWG) and a digitiser in a single portable unit.

Read more...

---

14-bit AWG at 20 GS/s
Vepac Electronics Test & Measurement
The Arb Rider AWG-7000 is the world’s fastest 14-bit Arbitrary Waveform Generator, featuring a 20 GS/s real time update rate and 14-bit vertical resolution.

Read more...

---

Additions to APD5000 series oscilloscopes
Osiris Technical Systems Test & Measurement
Each unit is equipped with an integrated CAT II digital multimeter, three programmable power supplies, a dedicated trigger line, and an arbitrary waveform generator.

Read more...

---

Handheld RTSA up to 9,5 GHz
Vepac Electronics Test & Measurement
The PXE-90 implements an FFT engine on the built-in FPGA and support frame compression with trace detection while ensuring no missing samples between FFT frames.

Read more...

---