Step-down converter

14 October 2015 Power Electronics / Power Management

Torex Semiconductor has developed the XC9252 series of 105°C step-down DC-DC controllers with 30 V operation and a low supply current. This is a high breakdown voltage product with an input voltage of 30 V, input rating of 36 V, and a peak voltage of 46 V for 400 ms.

The input voltage range is wide – from 3,0 V to 30 V – and the P-channel MOS driver transistor is controlled to provide a stable output voltage even when the dropout voltage is low. The output voltage can be set to any value from 1,5 V upwards using external resistors.

PWM/PFM auto switching control realises high efficiency over the entire load range, and a low supply current is achieved to increase efficiency at light loads, making this controller ideal for a variety of applications. The switching frequency can be set to any value from 280 kHz to 550 kHz by connecting an external resistor, while unnecessary noise can be suppressed by synchronising to an external clock within a range of ±25% of the internal clock.

Any value can be set for the soft-start time by adding an external capacitor, and an under-voltage lockout function that forcibly turns off the driver transistor when the input voltage is 2,5 V or less is incorporated. As protective circuits, over-current protection, short-circuit protection and thermal shutdown are implemented to enable safe use.

For more information contact Arnold Perumal, Avnet South Africa, +27 (0)11 319 8600, [email protected], www.avnet.co.za

Further reading:

Analysis of switch-mode power supply: inductor violations
Altron Arrow Editor's Choice Power Electronics / Power Management
Common switch-mode power supply (SMPS) design errors are discussed, and their appropriate rectification is specified, with details on complications that arise with the power stage design of DC-DC switching regulators.

Read more...

---

Compact PCB-mount SMPS
RS South Africa Power Electronics / Power Management
Traco Power’s 5W PCB-mount switch mode power supply (SMPS) offers high efficiency, and is well suited for a variety of applications in the automation, electronics, electrical and mechanical industries.

Read more...

---

AC-DC brick PSU
Conical Technologies Power Electronics / Power Management
These PSUs have a typical efficiency of up to 92%, and a power factor value of up to 0,99. They are available in 12, 24, 28, 48 and 54 V output versions.

Read more...

---

5 kW switching PSU range
Conical Technologies Power Electronics / Power Management
Mornsun has released a new switching power supply range, the LMF5000-25Bxx, which has a 5000 W capacity, and features universal AC input configurations.

Read more...

---

Reliable charging range
Current Automation Power Electronics / Power Management
Whether you’re powering essential electronics, keeping emergency equipment operational, or maintaining the performance of critical machinery, the need for dependable charging solutions cannot be overstated.

Read more...

---

Microchip expands its mSiC solutions
EBV Electrolink Power Electronics / Power Management
The highly integrated 3,3 kV XIFM plug-and-play digital gate driver is designed to work out-of-the-box with high-voltage SiC-based power modules to simplify and speed system integration.

Read more...

---

Dual-port USB-C power delivery solution
Altron Arrow Power Electronics / Power Management
Infineon’s CYPD7272-68LQXQ is the tray packing option of the company’s dual-port USB-C power delivery solution and features an integrated dual-port USB-C PD + DC-DC controller.

Read more...

---

Parallel redundancy power module
Conical Technologies Power Electronics / Power Management
The LIR40-40 is a wide input range DC-DC module, with a constant output of 48 V at a nominal output current of up to 40 A.

Read more...

---

Motor protection relay front-end
NewElec Pretoria Power Electronics / Power Management
Newelec’s Motor Protection Relay front-end software isn’t just another tool, it’s a game changer that puts control firmly in your hands.

Read more...

---

High-power three-phase supplies
Current Automation Power Electronics / Power Management
The units from Meanwell can either be supplied with a three-phase three-wire delta input of 196 to 305 V AC, or they can use a three-phase four-wire star connection of 340 to 530 V AC.

Read more...

---