4 November 2015Manufacturing / Production Technology, Hardware & Services
Rogers Corporation has unveiled ULTRALAM 3850HT liquid-crystal-polymer (LCP) laminates for simplified and improved construction of multilayer circuit boards at higher temperatures. With a melt temperature of +330°C, these adhesiveless laminates use LCP as the dielectric film to deliver high yields in single-layer and multilayer circuit constructions. These laminates are well suited for high-speed and high-frequency circuit applications such as in mobile and Internet communications devices and automotive radar systems.
The high melt temperature of ULTRALAM 3850HT LCP circuit materials helps them survive multiple solder reflow procedures and increases multilayer boards’ processing temperature window. They have a design dielectric constant of 3,14 at 10 GHz and +23°C, with a typical dissipation factor of 0,0020 at 10 GHz and +23°C.
The coefficient of thermal expansion (CTE) from +30°C to +150° is typically 18 ppm/°C in the x and y dimensions of the material and 200 ppm/°C through the thickness (z dimension) of the material, providing good dimensional stability, predictable multilayer board scaling, and good registration. The circuit material features thermal conductivity of 0,2 W/m/K and thermal coefficient of dielectric constant of +24 ppm/°C from -50°C to +150°C.
ULTRALAM 3850HT circuit materials are available in panels of double copper-clad laminates and can be used with ULTRALAM 3908 bonding film for multilayer constructions. Standard panel sizes include 457 x 305 mm and 457 x 610 mm with 9 m and 18 m low-profile electrodeposited (ED) copper. Panels with rolled copper and in custom sizes are available upon request.
Soldering day highlights
Manufacturing / Production Technology, Hardware & Services
JAPAN UNIX has published a new event report and highlight video from their UNIX SOLDERING DAY 2026 in Hungary. This event reflects on their commitment to supporting manufacturers not only through soldering automation systems, but also through technical education, live demonstrations, hands-on training, and practical engineering know-how.
Read more...Clearing the Static: Electrostatic Discharge Actum
Manufacturing / Production Technology, Hardware & Services
A cordless ESD (Electrostatic Discharge) wrist strap does not work by grounding the person in the same way as a traditional wired wrist strap. Instead, it works by reducing or balancing the static charge on your body so that you are less likely to discharge electricity into sensitive electronic components.
Read more...Practical design strategies for 5G RF Design
Telecoms, Datacoms, Wireless, IoT
The Cavli CQM211 aims to provide a platform that combines strong 5G connectivity with onboard compute capability, as well as interface flexibility that suits both new designs and rapid migrations from earlier products.
Read more...Nordic expands nRF Cloud with firmware vulnerability scanning RF Design
Computer/Embedded Technology
nRF Cloud identifies vulnerabilities in firmware and shows exactly which deployed devices are affected, empowering device manufacturers to address EU Cyber Resilience Act requirements.
Read more...Engineering trust in South Africa’s SMT sector ZETECH ONE
Manufacturing / Production Technology, Hardware & Services
From a small Johannesburg start-up to a trusted SMT technology partner, Zetech One has spent four decades helping South African electronics manufacturers improve production quality, efficiency and reliability.
Read more...The new reality of PCB material supply Jemstech
Editor's Choice Manufacturing / Production Technology, Hardware & Services
How resilient manufacturing strategies are helping OEMs navigate a changing global supply chain.
Read more...Streamlining Device Programming with the AutoBee-D1 Vepac Electronics
Manufacturing / Production Technology, Hardware & Services
The AutoBee-D1 desktop automated programmer is designed to simplify the programming of devices, while delivering consistent accuracy, high throughput and reduced manual intervention.
Read more...Zero PFAS die attach paste Testerion
Manufacturing / Production Technology, Hardware & Services
With silver price volatility increasing and sustainability requirements accelerating across semiconductor assembly, MacDermid Alpha Electronics Solutions introduces ATROX CD 560-1, a zero per- and polyfluoroalkyl substance (PFAS) alternate silver filler die attach paste.
Read more...Precision jet printing for advanced PCB designs MyKay Tronics
Manufacturing / Production Technology, Hardware & Services
Mycronic’s BA 01 small dot ejector delivers unmatched precision in solder paste jet printing for advanced PCB designs.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version