Flash-based 8 bit low-power micro

7 November 2001 DSP, Micros & Memory

The E0C88F360 is an 8 bit micro-controller with embedded flash memory, data SRAM and dot matrix LCD display, providing a complete system-on-chip solution for many of today's handheld devices and instrumentation applications.

The first MCU from Epson to incorporate flash ROM (60 KB) and LCD driver capability on one chip, it has very low power consumption of 3 mA in stand-by mode. The dot matrix LCD driver has a separate 3,216 bit display RAM giving up to four rows of 32 5 x 5 characters and a built-in LCD voltage levels. A supply voltage detection circuit automatically compensates the display for battery voltage variations and contrast can be controlled by software. Peripherals include serial I/O, three timers, 4-channel A/D, 2-channel analog comparators, watchdog, sound generator, I/O ports and an interrupt controller. The E0C88xx family of CMOS microcontrollers has a common instruction set and a full in-circuit emulator and optimised C-compiler are available.

Further reading:

The 8-bit survival syndrome – Part 2
DSP, Micros & Memory
Just like the 4-bit pre-microcontroller, the 8-bit MCU has been finding ways to stick around. Their features and speeds have been improving, offering competitive reasons to work with them.

Read more...

---

Enhanced code protection for USB µC portfolio
Future Electronics DSP, Micros & Memory
To help easily incorporate USB power and communication functionality into embedded systems, Microchip Technology has launched the AVR DU family of microcontrollers.

Read more...

---

General-purpose MCU with RISC-V architecture
EBV Electrolink DSP, Micros & Memory
Renesas has released a general-purpose MCU to enhance its existing RISC-V portfolio, and this is its first MCU using a RISC-V core developed internally at the company.

Read more...

---

8-bit MCU with I3C support
Avnet Silica DSP, Micros & Memory
The PIC18-Q20 8-bit microcontrollers from Microchip easily interface with devices operating in multiple voltage domains, and the built-in I3C interface supports higher-speed and lower-power data transfers than I2C.

Read more...

---

An evolutionary step in customisable logic
Altron Arrow DSP, Micros & Memory
Microchip Technology is offering a tailored hardware solution with the launch of its PIC16F13145 family of microcontrollers, which are outfitted with a new Configurable Logic Block module.

Read more...

---

MCU for battery-powered applications
Altron Arrow DSP, Micros & Memory
Included in ST’s family of devices is the STM32U031, an ultra-low-power MCU featuring an ARM Cortex-M0+ 32-bit core running at up to 56 MHz.

Read more...

---

Serial SRAM up to 4 MB
EBV Electrolink DSP, Micros & Memory
The chips are designed to provide a lower-cost alternative to traditional parallel SRAM products, and include optional battery backup switchover circuitry in the SRAM memory to retain data on power loss.

Read more...

---

SiP supports LTE/NB-IoT and GNSS
RF Design DSP, Micros & Memory
The nRF9151 from Nordic Semiconductor is an integrated System-in-Package that supports LTE-M/NB-IoT, DECT NR+ and GNSS services.

Read more...

---

Qi2 dsPIC33-based reference design
DSP, Micros & Memory
Powered by a single dsPIC33 Digital Signal Controller, the Qi2 reference design offers efficient control for optimised performance.

Read more...

---

MIKROE’s IDE now includes MPLAB XC compilers
DSP, Micros & Memory
MIKROE has announced that the latest version of its multi-architectural IDE, NECTO Studio 6.1, now includes Microchip’s MPLAB XC compilers for 8-, 16- and 32-bit MCUs.

Read more...

---