Batch probe calibration

7 November 2001 Test & Measurement

Spescom MeasureGraph has launched the Fluke 518-BatchCal dual temperature range dry-block calibration system that it says makes short work of batch temperature probe calibrations. Two independent test wells in one enclosure allow one to calibrate temperature probes and switches from a low -30°C to as high as 670°C - at the same time.

With the included MET/TEMP calibration software, Fluke recording thermometer and two PRT reference probes, the system delivers a complete automated batch calibration system that simplifies multiple probe calibration.

Key features include: two independent Dry-Blocks in one enclosure; calibrates up to 14 probes at one time; 0,02°C stability and 0,01°C resolution; independent control of two ranges -30-140°C and 100-670°C; manual or PC control via RS232 or optional IEEE-488; complete automation through MMET/TEMP temperature calibration software (Fluke MET/CAL Plus compatible); Fluke recording thermometer plus two reference PRT probes.

Further reading:

Real-time monitoring for smart power distribution
CST Electronics Test & Measurement
By leveraging high-precision measurement, high-speed wave-recording, and AI-enabled analytics, the InHand Wireless Overhead-lines System empowers power utilities to accurately identify line faults and perform comprehensive load analysis.

Read more...

---

Compact vector network analyser
Vepac Electronics Test & Measurement
Siglent Technologies has introduced the SNA5000X-E Vector Network Analyzer, a compact, cost-effective solution engineered to meet essential RF testing needs, while maintaining dependable performance.

Read more...

---

Smart digital fibre sensor
Avnet Abacus Test & Measurement
Panasonic Industry Europe has introduced the new FX-250 digital fibre sensor designed to support users in their daily working routines as effectively as possible.

Read more...

---

Compact USB spectrum analyser solution
Vepac Electronics Test & Measurement
The HAROGIC SAN Series USB Spectrum Analyser is a compact USB-based spectrum analyser and receiver that covers a broad frequency range from 9 kHz up to 9 GHz.

Read more...

---

B&K Precision’s Series 1820B frequency counter
Comtest Test & Measurement
These compact and versatile instruments are designed for a wide range of frequency measurement applications, from telecommunications to verification and validation of oscillators.

Read more...

---

How transition-edge sensors detect microwave radiation
Test & Measurement
The elegant interplay of superconductivity, thermal physics, and precision electronics makes TES technology a cornerstone of modern low-energy photon detection.

Read more...

---

Compact high precision magnetometer
Future Electronics Test & Measurement
Bosch Sensortec has introduced the BMM350, a compact 16-bit, 3-axis magnetometer engineered to deliver high accuracy, low noise, and exceptional energy efficiency in space constrained designs.

Read more...

---

Ultra compact NTC thermistors
RS South Africa Test & Measurement
Murata Manufacturing Co. has expanded its compact NCU03 series of NTC thermistors with two ultra-small 0603M devices tailored for consumer and automotive designs.

Read more...

---

Omniflex uses LoRaWAN to track water usage
Omniflex Remote Monitoring Specialists Test & Measurement
Omniflex has helped New South Wales Ports improve its ability to track water usage by installing remote monitoring to 38 water meters at its Port Kembla site, sending the data to the NSWPorts web portal.

Read more...

---

Surviving the extremes: Understanding shock and vibration in MEMS sensors
Altron Arrow Editor's Choice Test & Measurement
By considering factors such as mechanical headroom, damping, and system-level robustness, designers can ensure that the chosen sensor not only survives, but performs reliably over time.

Read more...

---