15 June 2016Enclosures, Racks, Cabinets & Panel Products
Smaller MicroTCA systems are used primarily for digital video and image processing, in automation and machine control systems and electronic signal processing. Applications in these areas often require just one or two AdvancedMC modules, but high data rates over the backplane are still necessary.
That’s why Pentair has developed a new 2-slot Schroff MicroTCA system. The ‘embedded MCH’ (eMCH) used in this system allows for communication between the AdvancedMC modules and the system monitoring, including power and cooling management, thus ensuring a high level of reliability. In addition, the 1 GbE switch connected to the 1 GbE uplink on the case front of the eMCH enables the system components to be linked directly into an existing network infrastructure.
The system is designed to accommodate one and two MicroTCA modules: either one and two single full-size modules or one and two mid-size modules can be inserted into the EMC-shielded unit. Using a small form-factor integrated eMCH instead of a double-size pluggable MCH module reduces the overall dimensions of the system to a very compact 260 mm width, 43 mm height and 302 mm depth.
The cooling unit, consisting of four fans and air filters, is installed to the right of the modules. Cold air is drawn in from the right and guided left through the system. An additional fan is located in the rear on the left next to the backplane, ensuring a cooling capacity of 150 W at an ambient temperature of +55°C. An open-frame PSU matched to the system with a capacity of 150 W ensures consistent power supply. All ports are linked on the MicroTCA backplane for large data transfer between modules.
Simple construction of the system makes it very service-friendly, as individual components are easy to replace or maintain. The top cover is removed by undoing a few screws, allowing the fan unit and air filter to be easily replaced. Small indentations in the base and top plates allow rubber feet (included) to be attached. This feature allows for stacking of multiple systems. Systems can also be equipped with 19” brackets and fitted into a cabinet.
Clearing the Static: Staying grounded: Ensuring effective ESD control Actum Electronics
Circuit & System Protection
To maintain reliable electrostatic discharge control, regular testing and accurate measurement are essential, with grounding products and ESD testing equipment being vital.
Read more...RF shield box to 12 GHz Vepac Electronics
Enclosures, Racks, Cabinets & Panel Products
The HDRF-1467-S from RF Electronics has a thick RF-absorbing foam that deadens standing waves and reflections to provide more than 100 dB of isolation.
Read more...Film and mica capacitors Actum Electronics
Passive Components
By utilising various polymer dielectrics plastics, Exxelia film and mica capacitors meet most technical requirements and serve all functions from standard filtering to specialised applications.
Read more...High visibility 4-digit panel ammeters Electrocomp Express
Enclosures, Racks, Cabinets & Panel Products
The MP-335PAS-1 is a 4-digit 7-segment red display ammeter with a measurement range of 4 to 20 mA and a very low power consumption.
Read more...Multi-channel SMPS cable assemblies RFiber Solutions
Enclosures, Racks, Cabinets & Panel Products
Withwave’s multi-channel SMPS cable assemblies (WMCS Series) provide a wide range of multiple coaxial connectors and flexible cable assemblies with a choice of 26,5, 40, 50 and 67 GHz configurations.
Read more...Building the control panels of the future Omron Electronics
Enclosures, Racks, Cabinets & Panel Products
The industrial automation world is built on robust and efficient control panels that are designed precisely and assembled to manage machines, processes and equipment across different industries.
Read more...What’s the big deal with DPL? Spectrum Concepts
Enclosures, Racks, Cabinets & Panel Products
The dynamic performance layer (DPL) forms a key part of the construction of Nitrowave coaxial cables, Samtec’s range of high-performance RF solutions for microwave and mmWave applications.
printer friendly version