13 July 2016
Power Electronics / Power Management
Opto-Electronics
Power Integrations announced its LYTSwitch-7 single-stage, non-isolated, TRIAC-dimmable, buck topology LED driver IC family. Capable of delivering up to 22 W without a heatsink in a very small SO-8 footprint, these high-efficiency devices are suitable for bulbs, tubes and fixtures.
LYTSwitch-7 designs do not require bleeders; employing simple, passive damping for TRIAC management and an off-the-shelf, single-winding inductor, reducing component count to just 20, as compared to approximately 35 parts for typical dimmable LED driver boards.
The ICs deliver a phase-cut (TRIAC) dimming solution with a wide dimming range and monotonic dimming response. They enable efficiency of greater than 86% – around 2% higher than conventional dimmable products – with high power factor, accurate regulation and comprehensive protection. They suit low- or high-line input as well as wide-range universal-input designs for commercial lighting applications, which operate from 90 V a.c. to 305 V a.c. with TRIAC dimming enabled in low-line installations.
LYTSwitch-7 includes a host of protection features including thermal foldback with end-stop shutdown, which protects the IC, driver and fixture at abnormally high ambient temperatures by automatically reducing the current flow and dimming the lamp. Developers find that thermal foldback is the key to reducing costs associated with over-design of both electrical and mechanical components to meet reliability goals, since the IC automatically limits unusual temperature excursions without extinguishing the lamp. Devices are also protected from open- and short-circuit conditions, input and output over-voltage, over-current and SOA.
Key applications include low-cost A19 lamps, small-form-factor lamps such as candle-style and GU10 bulbs, commercial and industrial applications, ceiling lamps and downlight fixtures. Two reference designs (DER-539 and DER-540) are available for download from the Power Integrations website at https://www.power.com/lytswitch-7.
Quality batteries are critical for IIoT Uniross Batteries
Power Electronics / Power Management
Batteries intended for use in industrial operations must indeed offer complete reliability under extreme environmental conditions, resistance to vibration and harsh environments.
Read more...12 kW hybrid inverter
Power Electronics / Power Management
Sungrow recently unveiled its next-generation residential energy storage solution, expanding its power range from 5 kW to 12 kW with the introduction of the new MG12RL hybrid inverter.
Read more...40 W and 75 W railway DC/DC converter Brabek
Power Electronics / Power Management
RECOM has announced two new cost-efficient DC/DC converters for the rail market with an ultra-wide 11:1 input range to cover all nominal input voltages from 24 to 110 V DC.
Read more...Power modules for solid-state transformers RS South Africa
Power Electronics / Power Management
Microchip’s new 3,3 kV silicon carbide modules deliver the required thermal performance and efficiency for SSTs to increase power available for token generation.
Read more...Solving South African power problems with locally built intelligence
Editor's Choice Power Electronics / Power Management
Smart metering infrastructure in South Africa remains patchy. The rollout has been slow, coverage is inconsistent, and for the most part, granular per-unit measurement simply does not exist.
Read more...Wide range power module
Power Electronics / Power Management
The latest DC-DC modules from Würth Elektronik are characterised by high resilience to voltage transients on the 24 V bus and an extremely wide input-voltage range from 3,5 V to 38 V.
Read more...Selecting primary batteries for maximum service life Uniross Batteries
Power Electronics / Power Management
Primary batteries play an important role in IoT applications. Designed for longevity, they have a high-energy capacity and are often used in standalone applications where charging is impractical or impossible.
Read more...4 kW e-mobility DC-DC converter Brabek
Power Electronics / Power Management
The RECOM RMOD4000 series of compact, plug-and-play DC-DC converters is a cost-effective solution to provide isolated 14 V, 28 V, or 56 V DC network rails from a high input voltage between 180 and 950 V DC.
Read more...Case Study: Turning data into insight Hamamatsu Photonics UK
Editor's Choice Opto-Electronics
Hamamatsu Photonics’ InGaAs PIN photodiode detector has proven consistent, reliable, and robust for more than a decade, helping Axetris to deliver stable, repeatable measurements.
Read more...Aluminium case upgrade boosts performance Vepac Electronics
Power Electronics / Power Management
The SQBF Quarter Brick 300 W DC to DC Converter is now available in a newly upgraded metal case designed to deliver improved durability and superior electrical performance across demanding applications.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version