Opto-Electronics


LED arrays

10 August 2016 Opto-Electronics

The second generation of Cree’s CXA LED arrays deliver up to 33% higher efficacy than the first generation, in the same form factors. Utilising elements of the Cree SC5 technology platform, this improvement in lumen density enables better performance and reduces system size and cost.

The parts share the same physical design as the previous generation, allowing lighting manufacturers to leverage the existing optical, mechanical and electrical design elements to accelerate time to market without additional cost. LM-80 data is available for all CXA2 LED arrays for lighting manufacturers seeking Energy Star qualification.

Available in 2-step, 3-step and 5-step EasyWhite bins, CXA2 LED arrays deliver system-level performance from 300 to over 19 000 lumens and can enable applications ranging from GU10s and commercial downlights to outdoor and high-bay lighting.

For more information contact Willem Schmidt, Arrow Altech Distribution, +27 (0)11 923 9600, wschmidt@arrow.altech.co.za, www.arrow.altech.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Microchip expands maXTouch M1 touchscreen controller
Altron Arrow DSP, Micros & Memory
Microchip Technology has again expanded its maXTouch M1 family of touchscreen controllers, now covering free-form widescreen format displays up to 42 inches down to small compact screens in the 2 to 5 inch range.

Read more...
ToF sensor with 6 m range
Altron Arrow Test & Measurement
Specifically designed for long-range, multitarget measurements, the VL53L4CX from ST Microelectronics provides very accurate distance measurements up to 6 m with excellent results over short distances.

Read more...
Microchip expands its Arm Cortex-M0+ portfolio
Altron Arrow DSP, Micros & Memory
PIC32CM PL10 MCUs feature a rich set of Core Independent Peripherals, 5 V operation, touch capabilities, integrated toolsets, and safety compliance.

Read more...
High-voltage X-Ray generators for advanced imaging
Vepac Electronics Opto-Electronics
X-ray has developed a high-performance range of HV generators designed for accuracy, long-term durability, and seamless integration into OEM environments.

Read more...
More room to scale
Altron Arrow Power Electronics / Power Management
With the latest STM32H5 lines from STMicroelectronics, you can now scale within the same platform, from a compact 1 Mbyte device to higher-memory MCUs for graphics-rich and feature-heavy designs.

Read more...
Multi-constellation GNSS module in a legacy-compatible footprint
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Telit Cinterion has announced the SE869eK2L, a single-frequency L1 GNSS module designed to help device manufacturers upgrade legacy positioning designs with improved performance and cost efficiency, while preserving design continuity.

Read more...
Compact SSI family for industrial automation
Altron Arrow Passive Components
Infineon Technologies has introduced the ISSI20BxxF Solid State Isolator (SSI) family, bringing solid-state isolation technology into high-volume applications traditionally served by photovoltaic isolators (PVIs), photovoltaic relays (PVRs), and electromechanical relays (EMRs).

Read more...
Rev 2.0 PolarFire FPGA ethernet sensor bridge
Altron Arrow Computer/Embedded Technology
Smaller, multi-camera platform enables scalable Ethernet architectures for NVIDIA Edge AI systems, while lowering power, cost and integration complexity.

Read more...
Universal IR receiver module
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Vishay Intertechnology has introduced a new series of infrared (IR) receiver modules for IR remote control applications, which feature a wide modulation frequency acceptance from 30 kHz to 68 kHz.

Read more...
Low profile SMD antenna
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The Havok PCS.06.A antenna, from Taoglas, is a low profile SMD LTE/cellular 4G/3G/2G embedded antenna designed for direct SMD mount on a device PCB.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved