Digitally enhanced power controllers
9 November 2016
Power Electronics / Power Management
Microchip announced the availability of a new Digitally Enhanced Power Analog (DEPA) controller designed to regulate current and voltage, and monitor temperature. The device improves digital support for battery charging and is ideal for DC-DC conversion in server, consumer, industrial and automotive applications.
The MCP19124/5 handles configurable charging algorithms for any chemistry, with capabilities for cell balancing and supercapacitor charging. Users may develop their own unique charging methods and implement them as well. Any voltage, current, temperature or duration can be used to trigger a transition to a new portion of the charge profile. These devices are also well suited for any DC-DC application requiring tight voltage or current regulation, capable of supporting flyback, boost, SEPIC or Cuk topologies.
The combination of independent voltage and current control loops means that either the current control loop can regulate to a specified target current, or the voltage control loop can regulate to a target voltage. Each analog control loop has a separate feedback network for independent pole-zero placement, and the ability to perform zero-cross detection for quasi-resonant operation.
The device has the ability to dynamically switch from a voltage target to a current target, or vice versa, by switching between the two control loops. The internal architecture ensures this transition is monotonic, without glitching or transient events. This control configuration even allows for pre-positioning of the output voltage at open or no-load conditions, greatly minimising transients when a load is applied.
A full suite of configurable, adjustable performance parameters is provided. These parameters are set in the internal registers of the device (no external components required) and the settings are dynamically adjustable during operation. The MCP19124/5 has an integrated linear regulator, MOSFET drivers, 8-bit PIC microcontroller core, analog-to-digital converter, precision oscillator, and analog control loops for a compact solution.
For more information contact Shane Padayachee, Avnet South Africa, +27 (0)11 319 8600, [email protected], www.avnet.co.za
Further reading:
Finding value for money with your IoT battery
Uniross Batteries
Power Electronics / Power Management
Designing an IoT application involves a lot of choices. Designers are looking for performance and quality, but need to balance those alongside a low Total Cost of Ownership.
Read more...
Powering the IoT
Uniross Batteries
Power Electronics / Power Management
Choosing the right battery is not simply a technical detail, but a defining factor in the longevity and cost-effectiveness of any IoT deployment.
Read more...
The move to DC infrastructure
IOT Electronics
Power Electronics / Power Management
The shift toward direct current infrastructure in data centres is accelerating as operators pursue higher efficiency, improved reliability, and stronger alignment with renewable energy goals.
Read more...
Power inductor for automotive applications
Würth Elektronik eiSos
Power Electronics / Power Management
The WE-MXGA inductor features RDC values up to 25% lower and a saturation current up to 47% higher compared to other components currently available on the market.
Read more...
High-performance DC-DC converter
Conical Technologies
Power Electronics / Power Management
With a wide 9 - 40 V DC input range, the Claf Power DWHB400-F24xxN series is a high-performance DC-DC converter family ideally suited for 12 V and 24 V battery-based systems including vehicles, off-grid installations, and distributed power architectures.
Read more...
DC-DC converters for next-generation IoT
iCorp Technologies
Power Electronics / Power Management
AIPUPOWER’s K78XXJT-500R3 and K78XXJT-500R3-LB give designers a compact, high-efficiency power option for battery-powered and space-constrained systems, combining up to 96% efficiency with no-load input current as low as 0,2 mA.
Read more...
240 W in compact form factor
Brabek
Power Electronics / Power Management
The cost-effective and reliable RECOM RACPRO1-S240E DIN-rail mount AC-DC series is only 125 x 139 mm and 39 mm wide, yet provides 240 W output.
Read more...
You cannot manage what you cannot measure
Power Electronics / Power Management
South African sites are generating solar energy. Most still have no idea what is consuming it… or when, or why. Intelligent load management hardware is changing that.
Read more...
Scalable and intelligent power solution
Power Electronics / Power Management
Designed for Africa’s rapidly evolving energy landscape, Bluetti’s ES125 offers a scalable, intelligent power solution that delivers reliable and cost-efficient electricity for uninterrupted operations.
Read more...
Simulating grid abnormalities
Conical Technologies
Power Electronics / Power Management
Simulating grid abnormalities has become an essential part of validating systems such as inverters, UPS units, photovoltaic inverters, and EV charging infrastructure.
Read more...
printer friendly version