MACOM Technology Solutions introduced five new high-performance MMIC amplifiers. All five parts cover the downstream 45–1218 MHz cable band, with two of the five parts – MAAM-011162 and MAAM-011163 – also covering the upstream band from 5–1218 MHz.
Designed specifically for DOCSIS 3.1 infrastructure applications, these devices are a subset of the company’s new high-performance MMIC portfolio launched at this year’s European Microwave Week (EuMW) show in London. They are targeted at meeting requirements for small to medium signal, 75 Ω amplifiers in new and legacy HFC (hybrid fibre coax) networks.
The MAAM-011220 is an 18,5 dB gain, high linearity, low noise figure gain block operating from 45– 1218 MHz. This amplifier is delivered in an industry standard 3-lead SOT-89 plastic package and can be biased at either 8 or 5 V depending on available voltage rails and system requirements.
The MAAM-011194, a differential, 3-stage VGA (variable gain amplifier), is delivered in a 5 x 7 mm PQFN package and operates from 45–1218 MHz. It delivers 36 dB gain, 2,5 dB noise figure and excellent ACPR (adjacent channel power rejection) at output levels of +7 dB above Cable Labs downstream radio frequency interference (DRFI) specifications.
The MAAM-011162 is a single-ended, high linearity, low noise figure amplifier covering both up and downstream bands of 5–1218 MHz. This device is assembled in a 3-lead SOT-89 plastic package and provides 18 dB of flat gain in both up- and down-stream applications.
The MAAM-011163 is a differential amplifier covering both upstream and downstream band 5– 1218 MHz. Assembled in a SOIC-8EP plastic package, this device has 19 dB gain, excellent S11 and S22 match, high linearity and 1,4 dB noise figure at 45 MHz.
The MAAL-011136 is a broadband, ultra-low noise figure amplifier operating from 45–1218 MHz. This device provides 20 dB of flat gain, low distortion with 16 dB S22, making it ideally suited as an input stage for low-cost fibre-to-the-X(FTTX) optical receivers and other 75 Ω infrastructure applications.
Full sensor to cloud solution CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.
Read more...Long-range Wi-Fi HaLow module TRX Electronics
Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.
Read more...Quectel launches 3GPP NTN comms module Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.
Read more...SIMCom’s A7673x series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.
Read more...Multi-channel cable assembly RFiber Solutions
Interconnection
Withwave’s Multi-Channel SMPM Cable Assemblies (WMCM Series) provide a wide range of multiple coax connectors and flexible cable assemblies, with a choice of 26,5, 40 and 50 GHz configurations.
Read more...Long-range connectivity module Avnet Silica
Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.
Read more...4G LTE-M/NB-IoT connectivity reference design iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.
Read more...Antennas to meet all connectivity requirements Electrocomp
Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.
Read more...Introducing SIMCom’s new A7673X series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.