16 Mb Flash memory for LV systems
26 Jan 2000
DSP, Micros & Memory
AGAtronics
A classical way of regulating fine voltage control as required in most of power supply unit applications is to use a TL1431 shunt voltage reference. According to STMicroelectronics this method obtains the desired precision by trimming an adjustable resistor for its programmation process. The typical voltage precision of this device is 2% which is not accurate enough for some applications and which can necessitate the intervention of an operator.
The company has thus developed an enhanced version of the well known adjustable voltage reference, the TL1431. This device offers a higher precision of 0,4% (standard) and 0,25% for the A version.
The device is a programmable shunt voltage reference with guaranteed temperature stability over the entire temperature range of operation (-40 to +105°C). The output voltage may be set to any value between 2,5 V and 36 V with two external resistors.
The TLC1031 operates with a wide current range from 1 to 100 mA. The device includes a highly stable reference voltage source with a maximum deviation for the nominal: 2,5 V to 20 mV (3 mV typical) across the entire temperature range for the TL1431C (commercial range) and 30 mV (7 mV typical) for the TL1431I (industrial temperature range).
These devices can be used in a variety of applications including power supplies, power adapters and battery chargers.
Further reading:
ESP32-C6 achieves PSA-L2
iCorp Technologies
DSP, Micros & Memory
Espressif Systems recently announced that its ESP32-C6 microcontroller has achieved PSA Certified Level 2 (PSA-L2) security certification, making it the first RISC-V-based MCU to reach this level.
Read more...
Microprocessor with integrated NPU
Avnet Silica
DSP, Micros & Memory
The RZ/G3E from Renesas is a microprocessor integrated with quad CPU and NPU in one chip, improving power efficiency, reliability, and security.
Read more...
Nordic Semiconductor launches nRF Connect SDK Bare Metal option for nRF54L series
Avnet Silica
DSP, Micros & Memory
This is a new, RTOS-independent software solution for Bluetooth LE development, designed to ease developers’ migration from the legacy nRF5 SDK and nRF52 series to the next-generation nRF54L series.
Read more...
Dual-core support in NECTO Studio
DSP, Micros & Memory
MIKROE recently announced that version 7.3.0 of its NECTO Studio Integrated Development Environment now supports dual-core MCUs, allowing designers to program and debug each core independently.
Read more...
Post Quantum Cryptographic firmware library
DSP, Micros & Memory
The STM32 post-quantum cryptographic library enables developers to satisfy application requirements for any combination of data integrity, confidentiality, identification/authentication, and nonrepudiation.
Read more...
MultiVolt series of oscillators
Future Electronics
DSP, Micros & Memory
The ECS-3225MVQ from ECS Inc. is a compact, quartz-based MultiVolt oscillator designed for precision timing in automotive, industrial, and portable electronic systems.
Read more...
MCU platform for battery-powered devices
Altron Arrow
DSP, Micros & Memory
The MCX W23 is a new dedicated wireless MCU platform from NXP for battery-powered sensing devices.
Read more...
Drive innovation with AURIX TriCore MCUs
Future Electronics
DSP, Micros & Memory
Infineon’s AURIX TriCore family balances safety, performance, and energy efficiency to offer a scalable and future-ready portfolio.
Read more...
Elevate your motor control designs
EBV Electrolink
DSP, Micros & Memory
Built on an Arm Cortex-M33 core running up to 180 MHz, the MCX A34 family combines high-performance math acceleration and advanced motor control subsystems to unlock efficient motor drive solutions.
Read more...
Embedded platform for compute-intensive applications
iCorp Technologies
DSP, Micros & Memory
The Quectel QSM368ZP-WF is a fully featured embedded ARM platform optimised for compute-intensive industrial and IoT applications.
Read more...
printer friendly version