Diodes Incorporated introduced the BCR401U, BCR402U and BCR405U linear LED drivers. Appealing to lighting designers, these constant-current regulators enable simple driving of low-current LED strips and panels in the commercial and industrial lighting sectors.
Targeted at 12 V and 24 V linear LED strips, these regulators increase light output efficiency as they only require a 1,4 V supply, allowing more LEDs in the string.
By achieving regulation within ±10% and providing preset options of 10 mA (BCR401U), 20 mA (BCR402U) and 50 mA (BCR405U) that can be adjusted up to 100 mA, these regulators simplify the design, minimise component count, and overall enhance system reliability by integrating the driver. Combined with the improved efficiency and longer life offered by LEDs, many lighting applications including advertising, emergency, refrigeration, decorative, architectural and other general forms are being superseded with this emerging light source.
Delivering a regulated current over a wide 1,4 V to 40 V supply, the BCR40xU will tolerate voltage spikes and LED short failures in strings, whilst preserving LED brightness and longevity. This, along with a negative temperature coefficient that reduces the LED current with rising temperature, helps to increase the LED lifespan by reducing dissipation and additionally enables parallel device operation for increased current in applications requiring more than 100 mA.
The BCR40xU operates as a linear LED driver, minimising the likelihood of EMI, which is particularly important in medical lighting and other sensitive applications, while LED brightness can be PWM controlled with <1% duty cycle at 25 kHz allowing accurate dimming to low light levels. The drivers are offered in the industry-standard SOT-26 (SC74R) package.
Powering the IoT Uniross Batteries
Power Electronics / Power Management
Choosing the right battery is not simply a technical detail, but a defining factor in the longevity and cost-effectiveness of any IoT deployment.
Read more...Cost-effective microcontroller series Altron Arrow
DSP, Micros & Memory
The STM32C5 series from STMicroelectronics delivers an excellent balance of performance, efficiency, and affordability for embedded designs that require more capability without increasing bill of materials cost.
Read more...Understanding two key tools for cleaner serial data Altron Arrow
Editor's Choice Analogue, Mixed Signal, LSI
Understanding how pre-emphasis and equalisation works, and when to use one over the other, is critical when designing reliable high-speed systems.
Read more...The move to DC infrastructure IOT Electronics
Power Electronics / Power Management
The shift toward direct current infrastructure in data centres is accelerating as operators pursue higher efficiency, improved reliability, and stronger alignment with renewable energy goals.
Read more...Power inductor for automotive applications Würth Elektronik eiSos
Power Electronics / Power Management
The WE-MXGA inductor features RDC values up to 25% lower and a saturation current up to 47% higher compared to other components currently available on the market.
Read more...High-performance DC-DC converter Conical Technologies
Power Electronics / Power Management
With a wide 9 - 40 V DC input range, the Claf Power DWHB400-F24xxN series is a high-performance DC-DC converter family ideally suited for 12 V and 24 V battery-based systems including vehicles, off-grid installations, and distributed power architectures.
Read more...DC-DC converters for next-generation IoT iCorp Technologies
Power Electronics / Power Management
AIPUPOWER’s K78XXJT-500R3 and K78XXJT-500R3-LB give designers a compact, high-efficiency power option for battery-powered and space-constrained systems, combining up to 96% efficiency with no-load input current as low as 0,2 mA.
Read more...Ultra-low jitter clocks Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Skyworks has introduced a new family of ultra-low jitter programmable clocks designed to meet the increasing demands of next-gen connectivity.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version